Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black mid-tower case with mesh front, tempered glass side panel, five ARGB fans visible

Montech

Montech HS01 PRO (B) ATX Mid-Tower PC Case Black

SKU CH-14YX-KHD39 MPN HS01 PRO (B)

ATX mid-tower with reversible layout, chimney airflow, five pre-installed ARGB PWM fans, toolless panels, and support for 420 mm GPU, 360 mm top radiator, and 175 mm CPU cooler

  • ColorBlack
  • Case MaterialSPCC / Tempered Glass
  • Motherboard CompatibilityATX / Micro ATX / Mini ITX
  • LEDARGB
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays2

Options HS01 PRO Mesh Black

Versi yang dicoret wujud, tetapi tidak tersedia di sini.

  • Reversible layout lets you showcase the build on either side
  • Chimney-style airflow moves heat from bottom intake to top exhaust
  • Five pre-installed ARGB PWM fans with 29 lighting modes
  • Vertical GPU mounting via rotatable PCIe slots without extra hardware
  • Spacious interior fits 420 mm graphics cards and 360 mm top radiators

Reversible ATX Mid-Tower Layout

The Montech HS01 PRO (B) is a black ATX mid-tower case built for builders who want a showcase chassis with flexible orientation. Its reversible design lets the tempered-glass panel sit on the left or right so the interior is always visible. Five pre-installed ARGB PWM fans provide immediate airflow and lighting. The chassis accepts ATX, Micro-ATX and Mini-ITX motherboards.

Chimney Airflow With 123 mm Top Radiator Limit

A mesh front panel feeds bottom-to-top airflow that creates a natural chimney effect for efficient heat dissipation. Dual rear fans exhaust heat while the top panel supports radiators up to 360 mm long with a maximum width of 123 mm. Front, bottom and top mounts each take three 120 mm fans; the rear takes two 120 mm fans. Fourteen expansion slots give room for vertical GPU mounting without extra brackets.

Upgrade From Fixed-Layout Cases When Orientation

This case replaces fixed-layout enclosures that force the glass panel to one side or limit vertical GPU installation. The rotatable PCIe slots enable an instant vertical graphics-card setup and the sink-in bottom fan layout keeps the side view clean. Back-connect motherboard support and relocated PSU placement simplify cable routing. It is not for builders who need more than two 3.5-inch or two 2.5-inch drive bays.

Ciri-ciri utama

  • Reversible layout lets you showcase the build on either side
  • Chimney-style airflow moves heat from bottom intake to top exhaust
  • Five pre-installed ARGB PWM fans with 29 lighting modes
  • Vertical GPU mounting via rotatable PCIe slots without extra hardware
  • Spacious interior fits 420 mm graphics cards and 360 mm top radiators

Spesifikasi

BrandMontech
Part NumberHS01 PRO (B)
ColorBlack
Case MaterialSPCC / Tempered Glass
Motherboard CompatibilityATX / Micro ATX / Mini ITX
LEDARGB
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots14
Fan OptionsBottom - 3 x 120mm / Front - 3 x 120mm / Rear - 2 x 120mm / Top - 3 x 120mm
Radiator OptionsBottom - Up to 120mm / Rear - Up to 120mm / Top - Up to 360mm
Max GPU Length420 mm
Max CPU Cooler Height175 mm
Max PSU Length200 mm
Dimensions18.91" x 9.45" x 18.91"
Berat penghantaran12.34 kg
Dimensi bungkusan573 × 572 × 324 mm

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Should I pick the ATX, Micro ATX or Mini ITX version of this case?

This single model fits ATX, Micro ATX and Mini ITX motherboards, so you do not choose between versions; the case accepts all three form factors.

What does the 420 mm GPU length mean once the card is installed?

It means any graphics card up to 420 mm long will fit, including current RTX 50 series models, with room for power cables in the sink-in layout.

What does the 360 mm top radiator limit cap in practice?

The top mounts a radiator up to 360 mm long, but the manufacturer notes the width must not exceed 123 mm, so select a 360 mm unit within that width.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.