myVolts
myVolts Power Supply for HP Pavilion 510-p131jp DT PC
Replacement AT power supply for the HP Pavilion 510-p131jp desktop with 20+4 pin ATX, 12V 4-pin, 6-pin and three SATA connectors
- TypeAT
- Replacement upgrade PSU restores reliable power
- 20+4 pin ATX connector fits standard motherboards
- +12V 4-pin connector delivers CPU power
- Three SATA connectors support multiple drives
- 6-pin power connector feeds dedicated graphics
Replacement PSU for HP Pavilion 510
This new AT-type power supply is a direct replacement for the HP Pavilion 510-p131jp desktop. It provides the standard connectors required by that chassis, including a 20+4 pin ATX connector, a +12V 4-pin power connector, three SATA connectors and one 6-pin power connector. The unit is supplied as a straightforward upgrade for the original power supply.
Suits owners of the specific Pavilion model
It fits users who need to restore power to this exact HP desktop after a failure or who want a fresh unit for a rebuild. Builders working on a different form factor, a proprietary small-form-factor case or a system that demands modular cabling should look elsewhere. The fixed cable set and connector count are tailored to the 510 chassis and will not adapt to other layouts.
Connector complement decides fit
The combination of one 20+4 pin ATX connector, one +12V 4-pin connector, three SATA connectors and a single 6-pin power connector determines whether this unit matches the motherboard and drive configuration. If the target build requires additional PCIe power leads or a different ATX pin arrangement, this supply will not meet that requirement.
Ciri-ciri utama
- Replacement upgrade PSU restores reliable power
- 20+4 pin ATX connector fits standard motherboards
- +12V 4-pin connector delivers CPU power
- Three SATA connectors support multiple drives
- 6-pin power connector feeds dedicated graphics
Spesifikasi
| Type | AT |
|---|
Soalan tentang produk ini
Will the AT-type design handle continuous load without tripping its protection?
The AT-type unit is built as a direct replacement for the HP Pavilion 510-p131jp DT PC and supplies power through a 20+4 pin ATX connector, a +12 V 4-pin connector, one 6-pin connector and three SATA connectors for sustained operation.
How loud does the fan get and how much heat does it push out when the PC runs all day?
The supply uses its internal fan to move air across the heatsinks while delivering power through the 20+4 pin ATX, +12 V 4-pin, 6-pin and three SATA connectors, keeping temperatures stable during extended use.
Which cables from my current build must stay in place for this unit to work?
You will reuse the motherboard 20+4 pin ATX cable, the CPU +12 V 4-pin cable, the graphics 6-pin cable and up to three SATA drive cables already routed in the chassis.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



