NEMIX RAM
NEMIX RAM 1.5TB (16x96GB) DDR5 6400 ECC RDIMM 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
A 1.5 TB DDR5-6400 ECC RDIMM kit of sixteen 96 GB modules, 2Rx4 registered at 1.1 V CL52, validated for the Supermicro H14DSH motherboard
- Capacity1.5TB (16 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 5 TB total capacity from sixteen 96 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors
- 2Rx4 organisation matches Supermicro H14DSH population rules
- 288-pin RDIMM form factor fits the server board
1.5TB DDR5 ECC RDIMM kit for Supermicro H14DSH
This sixteen-module kit delivers 1.5TB of DDR5 6400 registered ECC memory in a 288-pin RDIMM form factor. It is built for the Supermicro H14DSH motherboard and matches the board's required rank, voltage and timing. The registered design allows full population of every slot at rated capacity.
DDR5 6400 registered ECC limits and population rules
DDR5 6400 (PC5-51200) at CL52 and 1.1V is the highest JEDEC speed this kit guarantees; faster operation depends on the motherboard's qualified-vendor list and BIOS revision. The H14DSH manual defines the approved DIMM population order and maximum capacity per channel, so full-speed recognition across all sixteen slots requires following that sequence exactly.
2Rx4 registered ECC rank and voltage match
Each 96GB module uses a 2Rx4 organisation with registered buffering and on-die ECC at 1.1V, the precise electrical signature the H14DSH memory controller expects. If your configuration calls for a different rank structure, voltage or unbuffered DIMMs, this kit will not be recognised at full capacity or at its rated speed.
Ciri-ciri utama
- 5 TB total capacity from sixteen 96 GB modules
- DDR5-6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors
- 2Rx4 organisation matches Supermicro H14DSH population rules
- 288-pin RDIMM form factor fits the server board
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 16X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
Should I buy the 16-module 1.5TB kit or add single 96GB sticks?
The kit supplies 16 matched 96GB RDIMMs tested together for the Supermicro H14DSH, so the memory controller sees identical rank, voltage and timing across every slot. Mixing loose sticks risks population errors or reduced speed.
Will the DDR5-6400 rating actually run at 6400 MT/s in my H14DSH?
Yes. The modules are spec-matched to the board's memory controller — 2Rx4 registered ECC, 1.1 V, CL52 — so the system will recognize the full 1.5 TB and operate at the rated 6400 MT/s when populated per the manual.
Does the 288-pin RDIMM interface limit how many modules I can install?
The 288-pin registered form factor is exactly what the H14DSH requires; it supports full population of all slots at the rated 6400 MT/s because the registered buffer offloads the memory controller.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



