NEMIX RAM
NEMIX RAM 128GB (16x8GB) DDR4 3200 ECC RDIMM CL22 Tyan FT83A-B7129 memory upgrade
128 GB DDR4 3200 ECC registered server kit in 16 x 8 GB modules, CL22 at 1.2 V, validated for Tyan Thunder HX FT83A-B7129 systems
- Capacity128GB (16 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128GB total capacity for memory-intensive server workloads
- 16 modules of 8GB each to fully populate available slots
- DDR4 3200 speed with PC4-25600 bandwidth for high-throughput applications
- ECC registered design with CL22 latency for data integrity and stability
- 2V operation on 288-pin RDIMM form factor for Tyan FT83A-B7129 compatibility
System-specific DDR4 server upgrade
This NEMIX RAM kit delivers 128GB across sixteen 8GB DDR4 3200 RDIMM modules built for the Tyan Thunder HX FT83A-B7129. Each registered ECC stick runs at 1.2V with CL22 latency and a 1Rx8 organisation. The 288-pin form factor matches the motherboard's memory slots exactly.
Suited to Tyan FT83A-B7129 expansion
Administrators scaling memory in a validated Tyan Thunder HX platform will find this kit plugs straight in without configuration changes. Builders using consumer boards, unbuffered DIMM slots, or systems that require non-ECC memory should look at something else because registered ECC modules are not compatible with those platforms.
Verify slot count and population rules
Confirm the motherboard has sixteen available DDR4 RDIMM sockets and review the vendor's population guide for 1Rx8 modules at 3200 MT/s. Ensure the BIOS revision supports the full 128GB capacity and that the chassis airflow can cool densely packed registered DIMMs.
Ciri-ciri utama
- 128GB total capacity for memory-intensive server workloads
- 16 modules of 8GB each to fully populate available slots
- DDR4 3200 speed with PC4-25600 bandwidth for high-throughput applications
- ECC registered design with CL22 latency for data integrity and stability
- 2V operation on 288-pin RDIMM form factor for Tyan FT83A-B7129 compatibility
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | Tyan Server/Workstation Motherboard Compatible Series Memory |
| Model | Tyan DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-818K16 |
| Capacity | 128GB (16 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Tyan |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (16X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
Soalan tentang produk ini
Does this 16-module kit require a Tyan Thunder HX FT83A-B7129 motherboard with 16 DDR4 RDIMM slots to operate?
Yes, the kit is built for the Tyan Thunder HX FT83A-B7129 and needs a board that provides 16 registered DDR4 slots to use every 8GB module.
Can I keep existing DDR4 3200 CL22 registered ECC modules and add this 128GB kit without changing BIOS voltage?
The kit runs at the standard 1.2V DDR4 voltage, so matching registered ECC modules at the same speed and latency will share that voltage without a BIOS change.
How do I confirm the full 128GB is recognised and running at 3200 MT/s with ECC active after install?
Check the POST memory count or the OS memory report — it should show 128GB at 3200 MT/s with ECC reported as enabled.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



