NEMIX RAM
NEMIX RAM 128GB (8×16GB) DDR5 4800 CL40 ECC RDIMM Server Memory Upgrade
Eight 16 GB DDR5 modules deliver 128 GB of ECC registered server memory at 4800 MT/s with CL40 latency and 1.1 V operation
- Capacity128GB (8 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity from eight 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM design for server data integrity
- 1 V operating voltage for efficient power use
- Validated for SuperMicro SYS-221HE-FTNR, SYS-221HE-FTNRD, SYS-221HE-TNR systems
128GB DDR5 4800 ECC RDIMM kit
This NEMIX RAM kit supplies 128GB of DDR5 registered ECC memory across eight 16GB modules. It runs at 4800MT/s with CL40 latency at 1.1V. The modules are 288-pin RDIMMs built with major OEM chips and qualified for Supermicro IOT SuperServer systems including SYS-221HE-FTNR, SYS-221HE-FTNRD and SYS-221HE-TNR.
Server builders needing registered ECC memory
The kit suits administrators upgrading or populating the listed Supermicro platforms where registered DIMMs with error correction are required. It does not suit desktop or workstation boards that accept only unbuffered non-ECC UDIMMs, nor systems limited to lower DDR5 speeds or different pin counts.
Eight-module 128GB capacity at 4800MT/s
The single deciding specification is the 128GB total capacity delivered as eight 16GB registered ECC RDIMMs operating at DDR5 4800. If the target server demands a different module count, rank configuration or speed grade, this kit will not match the qualified memory list.
Ciri-ciri utama
- 128 GB total capacity from eight 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM design for server data integrity
- 1 V operating voltage for efficient power use
- Validated for SuperMicro SYS-221HE-FTNR, SYS-221HE-FTNRD, SYS-221HE-TNR systems
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Soalan tentang produk ini
Will this 128GB DDR5 4800 kit run alongside my existing DDR5 RDIMMs in the SuperMicro SYS-221HE-FTNR?
Yes, if the installed modules are also DDR5 4800 CL40 1Rx8 1.10V RDIMMs; matching speed, latency, rank and voltage keeps the memory controller in a single timing domain.
How can I verify the 128GB kit is detected and ECC is active after installation?
Enter the system BIOS or UEFI; the memory information screen should show 128 GB total, DDR5 4800 MT/s, and ECC status as enabled or active.
What comes in the box and do I need any extra parts for the SuperMicro SYS-221HE-FTNR?
The box contains eight 16 GB DDR5 4800 CL40 288-pin ECC RDIMM modules; no additional components are required for the listed SuperMicro servers.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



