Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 ECC Registered RDIMM 2Rx4 CL40 1.1V Supermicro H13SSW memory upgrade

SKU CH-8ZMF-7DTE2

128 GB DDR5 4800 RDIMM with ECC and registered buffering, validated for Supermicro H13SSW servers

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

Lihat 24 konfigurasi lagi
  • 128 GB DDR5 4800 runs at rated speed with exact-match timing CL40
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors
  • 10 V low-voltage operation meets the server memory controller specification
  • 288-pin RDIMM form factor fits the Supermicro H13SSW motherboard memory slots
  • Lifetime replacement warranty and free US-based technical support included

Exact-fit DDR5 RDIMM for Supermicro H13SSW

This 128 GB DDR5 4800 (PC5-38400) module is a registered ECC RDIMM built to the 2Rx4 rank and 1.1 V specification that the Supermicro H13SSW memory controller expects. It installs in the board's 288-pin slots and is recognised at full capacity and rated speed without manual tuning. The part suits administrators upgrading a single H13SSW system to its maximum supported density.

Passive thermals and low-voltage operation

With no heat spreader, the module relies on chassis airflow and runs at the standard DDR5 voltage of 1.1 V. Registered buffering reduces electrical load on the memory controller, helping keep power draw predictable when every slot is populated. The CL40 latency is the rated timing at 4800 MT/s, so the server operates within its validated thermal envelope during sustained workloads.

Enterprise-grade build with registered ECC

The registered architecture offloads the controller to allow full-population stability, while on-die ECC corrects single-bit errors before they reach production data. Major OEM DRAM from Samsung, Micron or Hynix underpins the kit. Buyers who need unbuffered UDIMMs, SODIMM form factors, or non-ECC memory for workstation or desktop platforms cannot use this module.

Ciri-ciri utama

  • 128 GB DDR5 4800 runs at rated speed with exact-match timing CL40
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors
  • 10 V low-voltage operation meets the server memory controller specification
  • 288-pin RDIMM form factor fits the Supermicro H13SSW motherboard memory slots
  • Lifetime replacement warranty and free US-based technical support included

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How do I install this 128GB DDR5 4800 RDIMM in my Supermicro H13SSW, and which slot-population step is most often missed?

Power down, open the chassis, and insert the 288-pin module into the slot specified by the motherboard manual for the desired capacity; the step most often missed is following the exact DIMM population order required when not all slots are filled.

What maintenance or replacement will this registered ECC module need over its service life?

No periodic maintenance is required; the module either continues operating or is replaced under lifetime warranty if a failure occurs, and ECC corrects single-bit errors on the fly without user intervention.

What is the first limit reached under sustained full-capacity load on this 128GB 2Rx4 kit?

The registered buffer and ECC logic keep every slot stable at the rated 4800 MT/s CL40 1.10 V, so the practical limit is the motherboard's maximum supported capacity rather than the memory itself.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.