Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two green DDR4 SODIMM sticks, no heat spreader, 260-pin

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 SODIMM Kit for POSIFLEX XT-8317

SKU CH-T31G-CM3D9

16GB DDR4 3200 SODIMM kit upgrades POSIFLEX XT-8317 POS terminals with two 8GB modules

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • 3200 MHz DDR4 speed handles demanding retail workloads
  • 2 V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX XT-8317 slot directly
  • CL22 latency ensures stable data access for continuous operation

System-Specific Kit for POSIFLEX XT-8317

This NEMIX RAM kit delivers 16GB of DDR4 memory across two 8GB SODIMM modules built for the POSIFLEX XT-8317 terminal. It targets IT teams maintaining point-of-sale systems that require validated, non-ECC unbuffered memory. The 260-pin form factor matches the platform's SO-DIMM slots exactly.

Sustained Workload Behaviour

Modules operate at 3200 MT/s with CL22 latency and a 1.2V supply, using major OEM Samsung, Micron or Hynix ICs. Each stick is stress-tested under load before shipping, so the 2Rx8 organisation remains stable during continuous transaction processing. No heat spreader is fitted, relying on the terminal's fanless thermal design.

Installation Notes

Insert both modules into the terminal's SO-DIMM slots; the keyed 260-pin edge connector prevents misalignment. The kit ships as a matched pair to avoid rank or timing mismatches. The only common issue is seating pressure — press firmly until the side latches click, otherwise the system will not recognise the capacity.

Ciri-ciri utama

  • 16 GB dual-channel kit boosts POS terminal responsiveness
  • 3200 MHz DDR4 speed handles demanding retail workloads
  • 2 V low-voltage operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX XT-8317 slot directly
  • CL22 latency ensures stable data access for continuous operation

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT

Soalan tentang produk ini

Does the 1.2 V DDR4 kit add noticeable heat or fan noise inside the POSIFLEX XT-8317?

The modules run at 1.20 V without a heat spreader, so they draw little power and add virtually no extra heat or noise to the fanless chassis.

What must the POSIFLEX XT-8317 already have for this 260-pin SODIMM kit to install?

The terminal needs two free DDR4 SODIMM slots and a BIOS that accepts 3200 MT/s CL22 2Rx8 modules.

Will the 3200 MT/s CL22 sticks down-clock reliably alongside any older DDR4 modules I keep in the XT-8317?

Yes, they will down-clock to match the slowest installed DDR4 speed and the loosest timings present.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.