NEMIX RAM
NEMIX RAM 16GB DDR4 2400 ECC UDIMM Synology Compatible memory upgrade
16 GB DDR4-2400 ECC UDIMM for Synology NAS, CL17 1.2 V 288-pin single module
- Capacity16GB
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 ECC UDIMM adds reliable capacity to Synology NAS
- 2400 MHz PC4-19200 speed matches supported system specifications
- CL17 latency at 1.20 V balances performance and efficiency
- 2Rx8 288-pin unbuffered design ensures mechanical compatibility
- Built with Samsung, Micron or Hynix chips and stress-tested for stability
Synology NAS Memory Upgrade
This 16GB DDR4 ECC UDIMM is built for Synology RackStation NAS systems that require error-correcting memory. It targets administrators and small-business users who need reliable capacity expansion for file services, virtualization or backup workloads. The module operates at 2400MHz with CL17 latency and 1.2V power draw.
Unbuffered 288-Pin Design
The stick uses a standard 288-pin DDR4 UDIMM form factor without a heat spreader, so it fits directly into compatible Synology memory slots. Major OEM chips from Samsung, Micron or Hynix are used, and each unit is stress-tested under load before shipping. The 2Rx8 organisation supports dual-rank operation on supported platforms.
Verify Slot Count And Maximum Capacity
Before ordering, confirm how many UDIMM slots your RackStation model provides and what total memory it officially supports. This module is a single 16GB rank; systems limited to 8GB per slot or to a lower aggregate ceiling will not recognise the full capacity. Also ensure the platform accepts DDR4 2400 ECC unbuffered modules rather than registered or non-ECC types.
Ciri-ciri utama
- 16 GB DDR4 ECC UDIMM adds reliable capacity to Synology NAS
- 2400 MHz PC4-19200 speed matches supported system specifications
- CL17 latency at 1.20 V balances performance and efficiency
- 2Rx8 288-pin unbuffered design ensures mechanical compatibility
- Built with Samsung, Micron or Hynix chips and stress-tested for stability
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC Unbuffered UDIMM |
| Part Number | ME19200-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 2666MHZ ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 288-PIN ECC Unbuffered UDIMM |
Soalan tentang produk ini
What DDR4 speed does the PC4-19200 rating cap the module at in practice?
The PC4-19200 rating limits the module to 2400 MT/s even though the series is labelled DDR4 2666MHZ.
Does the 288-pin ECC UDIMM need a heat spreader to fit in a Synology RackStation NAS?
No heat spreader is included; the bare 288-pin UDIMM fits the standard DIMM slots in compatible Synology NAS units.
How is the single 16 GB 2Rx8 module installed, and what step do people often miss?
Power off the NAS, open the chassis, align the notch on the 288-pin edge connector, press firmly until the retention clips click, then power on and verify the new capacity in DSM.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



