NEMIX RAM
NEMIX RAM 16GB DDR4 2666 ECC UDIMM 1.2V CL19 288-Pin Synology Compatible memory upgrade
16GB DDR4 2666 ECC UDIMM module validated for Synology NAS reliability
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in Synology NAS
- 16 GB capacity expands memory for heavy workloads
- 2666 MHz DDR4 speed matches system specifications
- 2 V low voltage reduces power consumption
- 288-pin UDIMM fits standard Synology memory slots
Synology NAS memory upgrade
This 16 GB DDR4 2666 ECC UDIMM is built for Synology RackStation NAS units that require error-correcting unbuffered memory. It installs in a standard 288-pin DIMM slot and operates at 1.2 V with a CL19 latency profile. The module targets administrators who need to expand capacity in a supported Synology platform.
Thermals noise and power draw
The stick runs at the standard DDR4 voltage of 1.20 V and carries no heat spreader, so it relies on the NAS chassis airflow for cooling. ECC operation adds minimal overhead while protecting data integrity during continuous workloads. Power consumption stays within the normal envelope for a single 16 GB unbuffered module.
What the bundle changes
The package contains only the single 16 GB UDIMM itself; no additional cables, brackets or software utilities are included. Compatibility is validated for the listed Synology systems, so the module can be installed without firmware adjustments. The lifetime replacement warranty covers the memory against defects for the usable life of the product.
Ciri-ciri utama
- ECC protection prevents data corruption in Synology NAS
- 16 GB capacity expands memory for heavy workloads
- 2666 MHz DDR4 speed matches system specifications
- 2 V low voltage reduces power consumption
- 288-pin UDIMM fits standard Synology memory slots
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC Unbuffered UDIMM |
| Part Number | ME21300-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 288-PIN ECC Unbuffered UDIMM |
Soalan tentang produk ini
How do I install the 288-pin DDR4 ECC UDIMM in my Synology RackStation, and what step is often missed?
Power off the NAS, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, then verify the new 16GB capacity in DSM before closing the case.
What maintenance or replacement will the 16GB DDR4 2666 ECC module need over time?
The unbuffered ECC UDIMM has no moving parts or heat spreader, so no routine maintenance is required; replacement is only needed if a memory error appears or capacity must be increased.
What limit appears first when the 2Rx8 CL19 1.2V module runs under sustained load?
The CL19 latency at 2666 MT/s sets the throughput ceiling, and the fixed 1.20 V supply prevents any frequency headroom during prolonged workloads.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



