Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

NEMIX RAM

NEMIX RAM 16GB DDR5 5200 CL38 1.1V 288-pin UDIMM memory upgrade for ASRock Z790 Taichi

SKU CH-ETVR-SB65H

16 GB DDR5-5200 UDIMM at 1.1 V with CL38 latency, built for ASRock Z790 Taichi boards

  • Capacity16GB
  • SpeedDDR5 5200 (PC5 41600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 5200 boosts desktop responsiveness
  • CL38 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM fits ASRock Z790 Taichi boards directly
  • Single 1Rx8 rank simplifies memory controller loading
  • Major OEM Samsung Micron Hynix chips ensure module reliability

16GB DDR5 module for ASRock Z790 Taichi

This 16GB DDR5 5200 UDIMM is built for ASRock Z790 Taichi, Taichi Carrara and Taichi Lite motherboards. It runs at 1.1V with CL38 latency and a single-rank 1Rx8 layout. The unbuffered non-ECC design suits desktop builders upgrading compatible ASRock platforms.

Thermals and power at stock settings

Operating at the standard 1.1V DDR5 voltage keeps power draw low and heat output modest during everyday workloads. No heat spreader is fitted, so the module relies on case airflow for cooling. Typical desktop chassis ventilation is sufficient for normal use.

Behaviour under sustained load

Modules are stress tested under load to verify stability during extended sessions. The single-rank organisation and standard voltage help maintain consistent timing without thermal throttling in well-ventilated systems. Compatibility validation targets the listed ASRock Z790 Taichi models.

Ciri-ciri utama

  • 16 GB DDR5 5200 boosts desktop responsiveness
  • CL38 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM fits ASRock Z790 Taichi boards directly
  • Single 1Rx8 rank simplifies memory controller loading
  • Major OEM Samsung Micron Hynix chips ensure module reliability

Spesifikasi

BrandNEMIX RAM
SeriesASRock Gaming Motherboard Compatible Series Memory
ModelASRock DDR5 5200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD41600-618K1
Capacity16GB
SpeedDDR5 5200 (PC5 41600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemASRock
CAS LatencyCL38
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5200MHZ PC5-41600 1Rx8 1.1V CL44 288-PIN Non-ECC Unbuffered UDIMM

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How do I install the 288-pin DDR5 UDIMM into my ASRock Z790 Taichi, and what step is often missed?

Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the memory runs at DDR5 5200 with CL38 timings at 1.10V.

What maintenance or replacement will this 16GB DDR5 module need over time?

No scheduled maintenance is required; the unbuffered non-ECC design has no heat spreader, so keep case airflow adequate, and replace only if memory errors appear or capacity needs increase.

What limit appears first when this CL38 DDR5 5200 kit runs sustained workloads?

The CL38 latency at 1.10V sets the performance ceiling; sustained heavy loads will hit timing and voltage constraints before thermal throttling becomes a factor.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.