NEMIX RAM
NEMIX RAM 192GB (4 x 48GB) DDR5 6400MHz CL52 2Rx8 1.1V ECC Registered RDIMM memory upgrade
192 GB DDR5-6400 ECC Registered RDIMM kit in four 48 GB modules at CL52 and 1.1 V, validated for the Supermicro H13SVW-N motherboard
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB capacity with four 48 GB modules for dense server memory configurations
- DDR5 6400 MHz speed rated at PC5-51200 for high-throughput workloads
- CL52 latency and 1.1 V operation matching the motherboard memory controller
- Registered ECC RDIMM design corrects single-bit errors and offloads the controller
- Verified fitment for Supermicro H13SVW-N motherboard with 288-pin form factor
Exact-match server upgrade
This 192GB kit delivers four 48GB DDR5 6400MHz modules built to the Supermicro H13SVW-N motherboard's precise rank, voltage and timing requirements. Registered ECC architecture with CL52 latency and 1.1V operation ensures full-capacity recognition at rated speed without manual tuning.
Registered RDIMM form factor
The 288-pin registered design offloads the memory controller so every slot runs fully populated at 192GB, while on-die ECC corrects single-bit errors before they reach production workloads. Modules ship without heat spreaders to fit dense server chassis and standard DIMM ejectors.
DDR5-6400 CL52 specification
The single figure that decides fitment is the DDR5-6400 (PC5-51200) speed grade combined with 2Rx8 registered ECC at 1.1V. Boards requiring UDIMM, SODIMM, a different voltage, or another DDR generation will not accept this kit.
Ciri-ciri utama
- 192 GB capacity with four 48 GB modules for dense server memory configurations
- DDR5 6400 MHz speed rated at PC5-51200 for high-throughput workloads
- CL52 latency and 1.1 V operation matching the motherboard memory controller
- Registered ECC RDIMM design corrects single-bit errors and offloads the controller
- Verified fitment for Supermicro H13SVW-N motherboard with 288-pin form factor
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 4X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
What DDR5 speed and CAS latency does this kit run at on the Supermicro H13SVW-N?
The modules are rated DDR5 6400 (PC5-51200) with a CAS latency of CL52, so the memory controller will recognise them at that speed and timing when populated correctly.
What physical slot and form factor do these modules need on the H13SVW-N?
They are 288-pin Registered RDIMMs; the board requires exactly that form factor, not UDIMM or SODIMM, and the kit provides four 48 GB sticks to fill the supported slots.
How do I install the four sticks in the right order on this motherboard?
Consult the Supermicro H13SVW-N manual for the approved DIMM population sequence, then seat each 2Rx8 Registered RDIMM firmly until the latches click, ensuring all four are installed in the prescribed order.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



