NEMIX RAM
NEMIX RAM 192GB (4x48GB) DDR5-6400 CL52 ECC Registered RDIMM Supermicro H13DSG-OM
192 GB DDR5-6400 CL52 ECC registered RDIMM kit (4 × 48 GB, 1.1 V, 2Rx8) validated for Supermicro H13DSG-OM motherboards
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 192 GB kit (4 × 48 GB) scales memory capacity to the board limit
- DDR5-6400 CL52 at 1.1 V runs at rated speed without tuning
- Registered ECC RDIMM offloads the controller and corrects single-bit errors
- 2Rx8 288-pin form factor matches the Supermicro H13DSG-OM slot layout
- Lifetime replacement warranty with US-based technical support included
192GB DDR5-6400 ECC RDIMM kit
This 192GB kit contains four 48GB DDR5-6400 registered ECC modules built to the exact specifications of the Supermicro H13DSG-OM motherboard. Each module runs at 1.1V with CL52 latency and a 2Rx8 organization. The 288-pin RDIMM form factor matches the board's memory slots precisely.
Suited for servers needing maximum registered ECC
Ideal for administrators populating every slot on a compatible Supermicro H13DSG-OM platform with validated registered ECC memory. Not suitable for systems that require unbuffered UDIMMs, SODIMMs, non-ECC modules, or a different DDR generation. Buyers needing lower capacities, different speeds, or consumer desktop memory should look elsewhere.
Fits a fully populated H13DSG-OM memory
The kit fills four DIMM slots with matched modules so the memory controller sees identical rank, voltage, and timing across every channel. Registered buffering reduces electrical load on the controller when all slots are occupied. ECC corrects single-bit errors in flight. No heat spreaders are included, so airflow must follow the chassis and motherboard design guidelines.
Ciri-ciri utama
- 192 GB kit (4 × 48 GB) scales memory capacity to the board limit
- DDR5-6400 CL52 at 1.1 V runs at rated speed without tuning
- Registered ECC RDIMM offloads the controller and corrects single-bit errors
- 2Rx8 288-pin form factor matches the Supermicro H13DSG-OM slot layout
- Lifetime replacement warranty with US-based technical support included
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 4X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
What motherboard must I already have for this 288-pin DDR5 RDIMM kit to be recognised?
The kit is verified for the Supermicro H13DSG-OM motherboard; the board must provide 288-pin DDR5 RDIMM slots that accept registered ECC modules.
Can I keep my existing DDR5 registered ECC DIMMs and add this 192GB kit alongside them?
All installed modules must match the same DDR5-6400 1.10V CL52 2Rx8 registered ECC specification; mixing different speeds, ranks or voltages will prevent the system from running at the rated 6400 MT/s.
How can I confirm the 192GB kit is running at DDR5-6400 with ECC active after installation?
Enter the BIOS or use a hardware-information utility to verify the memory reports 6400 MT/s, CL52 timings, 1.10 V and that ECC status shows enabled for all 4 slots.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



