NEMIX RAM
NEMIX RAM 32GB DDR4 2133 PC4-17000 CL15 1.2V 288-Pin ECC RDIMM 2Rx4 server RAM
32 GB DDR4 ECC registered DIMM running at 2133 MHz CL15 1.2 V for server and NAS stability
- Capacity32GB
- Type288-Pin DDR4 RDIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 32GB capacity supports heavy virtualization workloads
- ECC registered design prevents data corruption in servers
- DDR4 2133 CL15 timing balances speed and stability
- 2V operation reduces power draw per module
- 2Rx4 288-pin RDIMM fits compatible QNAP NAS systems
Capacity and purpose
This 32 GB DDR4 RDIMM is built for servers and NAS appliances that require registered ECC memory. It targets IT professionals upgrading QNAP systems or similar platforms where data integrity and stability are essential.
Thermals and power
The module operates at 1.20 V without a heat spreader, relying on system airflow for cooling. Registered buffering and ECC circuitry add minimal overhead, keeping power draw low during typical workloads.
Compatibility assurance
Each stick is stress tested under load and validated for the QNAP RAM-32GDR4ECT0-RD-2133 part number. Major OEM DRAM from Samsung, Micron or Hynix ensures consistent quality across the 2Rx4 configuration.
Ciri-ciri utama
- 32GB capacity supports heavy virtualization workloads
- ECC registered design prevents data corruption in servers
- DDR4 2133 CL15 timing balances speed and stability
- 2V operation reduces power draw per module
- 2Rx4 288-pin RDIMM fits compatible QNAP NAS systems
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Device Memory |
| Model | QNAP NAS Memory |
| Part Number | MR17000-324K1 |
| Capacity | 32GB |
| Type | 288-Pin DDR4 RDIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC RDIMM Registered Server Memory Motherboard Compatible |
Soalan tentang produk ini
How do I install this 288-pin DDR4 RDIMM, and which step is often missed?
Power down the server, open the chassis, align the module key with the slot, press firmly until both retention clips click, then verify in BIOS that the 32GB module is recognised at 2133 MT/s.
What maintenance or replacement will this ECC RDIMM need over time?
No scheduled maintenance is required; the module has no heat spreader and relies on system airflow, so keep chassis filters clean. Replace only if memory diagnostics report correctable or uncorrectable errors.
What limit appears first when this CL15 1.2 V module runs under sustained load?
The DDR4 2133 bandwidth ceiling is reached before thermal throttling, because the registered design and low voltage keep temperatures within spec during continuous operation.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



