Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 1.1V 2Rx8 288-Pin UDIMM SuperMicro SYS-531AD-I C9Z790-CG memory upgrade

SKU CH-DGKP-80CGP

32 GB DDR5 module running at 4800 MT/s with CL40 latency for Supermicro SYS-531AD-I and C9Z790-CG systems

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity expands workstation memory for heavy multitasking
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • CL40 latency supports responsive data access
  • 1 V operation reduces power draw and heat
  • 288-pin UDIMM fits Supermicro SYS-531AD-I and C9Z790-CG systems

System-Specific DDR5 Upgrade

This 32GB DDR5 module is built for the SuperMicro SYS-531AD-I and C9Z790-CG platforms. It targets IT professionals and workstation builders who need validated, non-ECC memory for those exact systems.

Compatibility Check

Verify that your motherboard accepts DDR5 4800 non-ECC unbuffered UDIMMs and has a free 288-pin slot. The module runs at 1.10V with CL40 latency and a 2Rx8 organisation, so the board must support those electrical and timing parameters.

Build and Daily Use

Major OEM Samsung, Micron or Hynix chips are assembled without a heat spreader, keeping the profile low for dense workstation chassis. The standard 288-pin DDR5 keying prevents mis-insertion, and the single-stick 32GB density simplifies future capacity expansion.

Ciri-ciri utama

  • 32 GB capacity expands workstation memory for heavy multitasking
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • CL40 latency supports responsive data access
  • 1 V operation reduces power draw and heat
  • 288-pin UDIMM fits Supermicro SYS-531AD-I and C9Z790-CG systems

Spesifikasi

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-328K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Does the NEMIX RAM 32GB DDR5 4800 CL40 UDIMM arrive as a single stick or a kit?

The module ships as one 32 GB stick (1X32GB). No extra memory is included.

Is the 4800 MT/s CL40 2Rx8 version the only option for this SuperMicro system?

This part number MD38400-328K1 is built for the SYS-531AD-I and C9Z790-CG at 4800 MT/s CL40 2Rx8. Other speeds or ranks are separate part numbers.

Will the 4800 MT/s rating run at that speed on the C9Z790-CG without manual tuning?

The UDIMM is JEDEC-standard DDR5-4800 1.10 V CL40, so the motherboard will configure it automatically at 4800 MT/s.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.