Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board SODIMM memory module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 SODIMM POSIFLEX HS-2512W JIVA memory upgrade

SKU CH-S9X2-HSHJQ

4 GB DDR3 1333 SODIMM module designed for POSIFLEX HS-2512W JIVA point-of-sale systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HS-2512W JIVA POS systems
  • DDR3 1333 speed with CL9 latency for responsive operation
  • 4 GB capacity in a single 204-pin SODIMM module
  • Low 1.35 V voltage reduces power draw in kiosk environments
  • Built with major OEM chips and stress-tested for reliability

System-specific POS memory upgrade

This NEMIX RAM module is built for the POSIFLEX HS-2512W JIVA desktop POS system. It provides a direct-fit 4 GB DDR3 SODIMM for point-of-sale terminals that require reliable, non-ECC memory. The unbuffered design suits the target platform without added latency.

1333 MHz DDR3 SODIMM compatibility

The decisive specification is the DDR3 1333 (PC3-10600) speed in a 204-pin SODIMM form factor. The module operates at 1.50 V with CL9 latency and a 2Rx8 rank configuration. Systems needing a different voltage, pin count or speed class cannot use this part.

4 GB capacity for typical POS workloads

A single 4 GB stick handles standard retail software, inventory databases and peripheral drivers with headroom for multitasking. Memory-intensive analytics, virtualisation or large local databases will exceed the available capacity and require a higher-density upgrade path.

Ciri-ciri utama

  • Designed for POSIFLEX HS-2512W JIVA POS systems
  • DDR3 1333 speed with CL9 latency for responsive operation
  • 4 GB capacity in a single 204-pin SODIMM module
  • Low 1.35 V voltage reduces power draw in kiosk environments
  • Built with major OEM chips and stress-tested for reliability

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Soalan tentang produk ini

Will the 1333 MHz speed run at that rate in the POSIFLEX HS-2512W JIVA?

The module is rated at DDR3 1333 (PC3-10600) and will operate at that speed if the system's memory controller supports it.

Does the 204-pin SODIMM interface limit the bandwidth to PC3-10600?

Yes, the 204-pin DDR3 SODIMM form factor carries the PC3-10600 specification, so the peak transfer rate is capped at that level.

Does the 2Rx8 rank layout fit the memory slot in the HS-2512W JIVA?

The stick is a standard 204-pin DDR3 SODIMM with 2Rx8 organisation, matching the slot used in the POSIFLEX HS-2512W JIVA.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.