SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
USD 391.99
0.00497165BTC
Ada stok
NEMIX RAM
NEMIX RAM 512GB 4x128GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H13SSH-E memory upgrade
512 GB DDR5-5600 ECC registered RDIMM kit (4 × 128 GB, CL46, 1.1 V, 2Rx4) validated for the Supermicro H13SSH-E motherboard
- Capacity512GB (4 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 512 GB total capacity from four 128 GB modules for maximum server density
- DDR5 5600 speed with CL46 latency delivers rated throughput without downclocking
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor verified for Supermicro H13SSH-E compatibility
512GB DDR5 5600 ECC RDIMM kit for Supermicro
This 512GB kit contains four 128GB DDR5 5600 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13SSH-E memory controller expects. The modules run at 1.1V with CL46 latency and use a 288-pin registered form factor so the board recognises the full capacity at rated speed.
Who this suits and who should look elsewhere
Server administrators upgrading a Supermicro H13SSH-E to its maximum supported memory with validated registered ECC modules will find this kit a direct fit. Builders needing unbuffered UDIMMs, SODIMMs, lower capacities, different speeds or non-ECC memory cannot use these modules.
2Rx4 registered ECC at DDR5 5600
The dual-rank 2Rx4 organisation with registered buffering and ECC is the single specification that determines whether this kit works in the target platform. If the motherboard requires single-rank UDIMMs or a different DDR5 speed the memory will not be recognised or will not run at its rated 5600MT/s.
Ciri-ciri utama
- 512 GB total capacity from four 128 GB modules for maximum server density
- DDR5 5600 speed with CL46 latency delivers rated throughput without downclocking
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor verified for Supermicro H13SSH-E compatibility
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-724K4 |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 4X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
Does the 288-pin DDR5 RDIMM form factor fit the Supermicro H13SSH-E motherboard slots?
Yes, the kit uses 288-pin DDR5 RDIMM modules, the exact form factor the Supermicro H13SSH-E requires for full-capacity operation.
What is the correct installation order for the four 128GB modules on this motherboard?
Follow the motherboard manual's DIMM population sequence; the board's memory controller expects a specific slot order to recognise all 512GB at DDR5-5600.
When should the registered ECC modules be replaced to maintain error correction?
Replace modules only if ECC logs report uncorrectable errors or the system experiences unexplained reboots; otherwise the registered design and ECC function continuously.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
USD 74.99
0.00095111BTC
Ada stok