NEMIX RAM
NEMIX RAM 512GB 8x64GB DDR5 5600 CL46 2Rx4 ECC Registered RDIMM Supermicro H13SSH-E memory upgrade
Eight 64 GB DDR5-5600 CL46 2Rx4 registered ECC RDIMMs at 1.1 V for the Supermicro H13SSH-E
- Capacity512GB (8 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 512 GB total capacity from eight 64 GB modules
- DDR5 5600 speed with CL46 latency runs at rated frequency
- Registered ECC design corrects single-bit errors and stabilises full population
- 1 V operation matches the Supermicro H13SSH-E memory controller spec
- 288-pin RDIMM form factor fits the board's required slot type
512GB DDR5 RDIMM kit for Supermicro H13SSH-E
This 512GB kit contains eight 64GB DDR5 5600 CL46 registered ECC RDIMMs built for the Supermicro H13SSH-E motherboard. The modules run at 1.1V with a 2Rx4 organisation and present the exact rank, voltage and timing the board's memory controller expects.
DDR5 5600 registered ECC limits
DDR5 5600 registered ECC modules operate at 1.1V and use a 288-pin RDIMM form factor that is not interchangeable with UDIMM or SODIMM slots. The registered buffer allows every slot to be populated at full capacity while ECC corrects single-bit errors on the fly, but the memory controller must support the registered protocol and the specific population rules of the H13SSH-E platform.
Upgrade from lower-capacity
This kit replaces smaller RDIMM sets or unregistered modules that cannot fill all slots at rated speed on the H13SSH-E. The jump is worth it when your workloads need the full 512GB capacity with hardware error correction and the stability of registered signalling across every channel. Buyers who need a different form factor, non-ECC operation, or a lower total capacity should look elsewhere.
Ciri-ciri utama
- 512 GB total capacity from eight 64 GB modules
- DDR5 5600 speed with CL46 latency runs at rated frequency
- Registered ECC design corrects single-bit errors and stabilises full population
- 1 V operation matches the Supermicro H13SSH-E memory controller spec
- 288-pin RDIMM form factor fits the board's required slot type
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 8X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
Is the 512GB kit with eight 64GB modules the only capacity option for the Supermicro H13SSH-E?
The listing supplies a single 512GB kit built from eight 64GB RDIMMs. The motherboard manual lists the approved population rules and maximum supported capacity for your specific CPU configuration.
What does the DDR5-5600 rating mean for actual throughput in this server?
The modules run at 5600 MT/s with CL46 latency at 1.1V. Registered ECC buffers each command so all eight slots operate at the rated speed when populated per the board's guidelines.
Does the 288-pin RDIMM interface limit how many modules I can install?
The 288-pin Registered DIMM form factor is what the H13SSH-E requires. The board's memory-controller design and population table determine the maximum usable modules, not the pin count alone.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



