Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Eight green DDR5 RDIMM modules with black chips and gold contacts in a tray

NEMIX RAM

NEMIX RAM 768GB (8x96GB) DDR5 5600 CL46 2Rx4 ECC RDIMM memory upgrade

SKU CH-J2RB-1KH4D

Eight 96 GB DDR5 RDIMMs deliver 768 GB of registered ECC memory at 5600 MT/s with CL46 latency for the Supermicro X14SDW-64C-SP9F motherboard

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Lihat 4 konfigurasi lagi
  • 768 GB total capacity from eight 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput at 1.10 V
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 2Rx4 288-pin RDIMM form factor matches the Supermicro X14SDW-64C-SP9F memory layout
  • Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability

768GB DDR5 5600 ECC RDIMM kit

This 768GB kit comprises eight 96GB DDR5 5600 CL46 registered ECC RDIMMs built for the Supermicro X14SDW-64C-SP9F motherboard. It delivers the exact rank, voltage and timing the platform expects so the memory controller recognises the full capacity at rated speed. System administrators scaling memory-bound workloads on this specific board will find a validated, drop-in upgrade. Builders using other motherboards or consumer platforms cannot use this registered ECC kit.

Capacity and headroom at 768GB

Eight 96GB dual-rank modules populate every slot the board supports, giving maximum density for virtualisation, in-memory databases or large-scale simulation. The registered architecture buffers each command so the controller drives a fully populated array at 5600 MT/s without signal degradation. Workloads that exceed 768GB or require higher frequencies will need a different platform; this kit cannot scale beyond the board's native limits.

Registered ECC build with 288-pin RDIMM form factor

Modules use major OEM DRAM from Samsung, Micron or Hynix and run at 1.1V without heat spreaders, relying on server chassis airflow for cooling. The 288-pin RDIMM keying prevents accidental installation in UDIMM or SODIMM slots, while on-die ECC corrects single-bit errors before they reach the OS. Installation must follow the motherboard manual's population order; no alternative form factors or voltages are supported by this kit.

Ciri-ciri utama

  • 768 GB total capacity from eight 96 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput at 1.10 V
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 2Rx4 288-pin RDIMM form factor matches the Supermicro X14SDW-64C-SP9F memory layout
  • Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will these DDR5 5600 2Rx4 ECC RDIMMs run alongside any older DDR5 modules I might still have installed?

Mixing modules of different speeds, ranks, or voltages can prevent the server from booting or force all DIMMs to run at the lowest common settings; the board's manual lists the approved population rules for the X14SDW-64C-SP9F.

How can I verify the kit is running at DDR5 5600 CL46 with ECC active after installation?

Enter the BIOS or use a tool such as dmidecode to confirm each 96 GB DIMM shows 5600 MT/s, CL46, 1.1 V, 2Rx4 organisation, and that ECC status reports as enabled and functional.

What exactly ships in the box and is anything else required to complete the 768 GB upgrade?

The package contains eight 96 GB DDR5 5600 CL46 2Rx4 1.1 V 288-pin ECC Registered RDIMMs; no extra cables, brackets, or software are included, and the motherboard must support this capacity and population order.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.