NEMIX RAM
NEMIX RAM 8GB DDR4 2666 ECC RDIMM Dell PowerEdge R540
8GB DDR4 2666 ECC registered DIMM validated for Dell PowerEdge R540 servers
- Capacity8GB
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in critical workloads
- Registered design stabilises signal integrity for server reliability
- 2V operation reduces power draw per module
- 288-pin DDR4 RDIMM fits Dell PowerEdge R540 slots
- CL19 latency at 2666 MHz delivers responsive throughput
Dell PowerEdge R540 ECC RDIMM
This NEMIX RAM module is an 8 GB DDR4 2666 registered DIMM built for the Dell PowerEdge R540 rack server. It operates at 1.20 V with a CL19 latency and uses a 1Rx8 organisation across 288 pins. ECC and registered buffering provide the data-integrity required in production server environments.
Suited for single-slot capacity upgrades
Administrators expanding memory in a PowerEdge R540 will find this stick drops straight into a free slot without configuration changes. Systems that need unbuffered UDIMMs, non-ECC memory, or speeds above 2666 MT/s should look at a different module because this part is registered ECC only.
Handles typical virtualisation workloads
The 8 GB capacity and 2666 MT/s throughput comfortably run several virtual machines or container hosts on a single node. Workloads that demand larger per-socket footprints — such as in-memory databases or heavy analytics — will exhaust this module quickly and require higher-density RDIMMs.
Ciri-ciri utama
- ECC protection prevents data corruption in critical workloads
- Registered design stabilises signal integrity for server reliability
- 2V operation reduces power draw per module
- 288-pin DDR4 RDIMM fits Dell PowerEdge R540 slots
- CL19 latency at 2666 MHz delivers responsive throughput
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR21300-818K1 |
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory |
Soalan tentang produk ini
My Dell PowerEdge R540 currently runs single-rank DDR4 RDIMMs — will this 1Rx8 module install alongside them?
Yes, this is a single-rank 1Rx8 registered DDR4 DIMM, so it can populate the same channels as other 1Rx8 RDIMMs in your R540.
After seating the 288-pin DDR4 RDIMM, how do I confirm the server sees the full 8 GB at 2666 MT/s with ECC active?
Enter the BIOS or iDRAC on the R540 and verify total memory shows the new 8 GB module running at 2666 MT/s with ECC enabled.
What existing hardware must my Dell PowerEdge R540 already have for this 288-pin DDR4 RDIMM to function?
Your R540 needs an available DDR4 RDIMM slot and a processor that supports DDR4-2666 registered ECC memory.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



