NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 1Rx8 UDIMM THINKMATE XF6-14X1 memory upgrade
8GB DDR4 3200 CL22 UDIMM module validated for Thinkmate XF6-14X1 workstations
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB DDR4 3200MHz capacity boosts multitasking headroom
- CL22 CAS latency supports responsive system operation
- 2V low voltage reduces power draw and heat
- 288-pin UDIMM form factor fits ThinkMate XF6-14X1 workstations
- Single-rank 1Rx8 organisation enables straightforward installation
ThinkMate XF6-14X1 Memory Upgrade
This 8 GB DDR4 module is built for the ThinkMate XF6-14X1 workstation. It adds a single 1Rx8 UDIMM to a compatible desktop or server platform. The non-ECC, unbuffered design targets standard office and workstation workloads. System integrators and IT staff use it to expand memory capacity in qualified machines.
DDR4 3200 Speed and Timing Limits
The kit runs at DDR4 3200 (PC4-25600) with a CAS latency of CL22 at 1.20 V. JEDEC-standard timing caps peak bandwidth at this data rate. Mixing with faster or lower-latency modules forces the system to the slowest common settings. The 288-pin UDIMM form factor fits only DDR4 desktop slots.
Replaces Slower or Smaller DDR4 DIMMs
Swapping out lower-frequency DDR4 or smaller-capacity sticks raises total memory and can improve multitasking headroom. The jump is worthwhile when the platform supports 3200 MT/s natively and the workload hits capacity limits. Buyers needing ECC error correction or registered buffering must choose a different module type.
Ciri-ciri utama
- 8GB DDR4 3200MHz capacity boosts multitasking headroom
- CL22 CAS latency supports responsive system operation
- 2V low voltage reduces power draw and heat
- 288-pin UDIMM form factor fits ThinkMate XF6-14X1 workstations
- Single-rank 1Rx8 organisation enables straightforward installation
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Soalan tentang produk ini
Should I choose the 8GB single module or look for a different capacity?
This part number is an 8GB single module (1x8GB) designed for the THINKMATE XF6-14X1; add more identical modules to reach your desired total capacity.
What does the 3200MHz speed mean for my workstation?
The module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V, delivering the rated throughput when the motherboard supports that frequency.
Does the 288-pin DDR4 UDIMM interface limit compatibility?
It fits standard 288-pin DDR4 UDIMM slots on the compatible THINKMATE system; the unbuffered, non-ECC design matches the workstation's memory architecture.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



