Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Six green 288-pin DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 96GB 6x16GB CL40 1.1V H13SSH memory upgrade

SKU CH-ZV46-Q7VA4

Sixteen-gigabyte DDR5 ECC registered modules totalling ninety-six gigabytes at forty-eight hundred megatransfers per second, CL40, 1.1 volts for Supermicro H13SSH

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Lihat 30 konfigurasi lagi
  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput at 1.1 V
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • Exact-match 288-pin RDIMM kit validated for Supermicro H13SSH motherboard
  • Built with major OEM Samsung, Micron or Hynix DRAM chips for enterprise reliability

96GB DDR5 RDIMM kit for Supermicro H13SSH

This 96GB kit contains six 16GB DDR5 4800 registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSH memory controller expects. It is intended for administrators upgrading that specific motherboard to its full supported capacity with hardware that will be recognised immediately.

Registered DDR5 limits and population rules

Registered DDR5 RDIMMs offload the memory controller so every slot can run fully populated at rated speed, while ECC corrects single-bit errors before they reach production workloads. The motherboard manual defines the supported capacities, approved population order and any slot-filling restrictions that must be followed.

CL40 1.1V 1Rx8 288-pin specification match

The modules operate at CL40, 1.1V and 1Rx8 on a 288-pin interface; those four parameters together decide whether the kit will initialise at DDR5 4800 on the H13SSH. Buyers who need a different voltage, rank structure or latency should look elsewhere.

Ciri-ciri utama

  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput at 1.1 V
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • Exact-match 288-pin RDIMM kit validated for Supermicro H13SSH motherboard
  • Built with major OEM Samsung, Micron or Hynix DRAM chips for enterprise reliability

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Should I pick this 96GB kit or a smaller capacity for my Supermicro H13SSH?

Choose the 96GB kit when your workload needs the full capacity across all six slots; the 1Rx8 registered design lets the memory controller run every DIMM at the rated DDR5 4800 speed without downclocking.

What does the DDR5 4800 rating actually deliver once the modules are installed?

The kit runs at 4800 MT/s with CL40 latency at 1.1 V, giving the bandwidth the H13SSH memory controller expects for production workloads without manual tuning.

How does the 288-pin RDIMM interface limit what I can install?

The 288-pin registered form factor is required by the H13SSH; UDIMM or SODIMM modules will not fit, and the board's population rules must be followed for all six slots to operate at full speed.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.