NEMIX RAM
NEMIX RAM DDR5 5600 1.5TB 16x96GB ECC RDIMM Supermicro H13SSF memory upgrade
A 1.5 TB DDR5 ECC RDIMM kit of sixteen 96 GB modules running at 5600 MT/s with CL46 latency and 1.1 V operation, registered for full-capacity stability on Supermicro H13SSF motherboards
- Capacity1.5TB (16 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 5 TB total capacity from sixteen 96 GB modules
- DDR5 5600 speed with CL46 latency runs at rated frequency
- Registered ECC design prevents silent data corruption under load
- 10 V operation matches the Supermicro H13SSF memory controller spec
- 288-pin RDIMM form factor fits the board's DIMM slots exactly
Exact-match DDR5-5600 kit for Supermicro H13SSF
This 1.5 TB kit delivers sixteen 96 GB DDR5-5600 RDIMMs built to the memory controller's exact rank, voltage and timing requirements. It targets administrators who need full-capacity population on a Supermicro H13SSF platform without manual tuning.
Registered ECC architecture at 1.1 V
Registered buffering offloads the memory controller so every slot runs fully populated at rated speed, while on-die ECC corrects single-bit errors before they reach production workloads. The 1.10 V operating voltage keeps power draw predictable across all sixteen modules.
Lifetime replacement warranty and US-based support
The bundled lifetime replacement warranty and free US-based technical support reduce long-term ownership risk for mission-critical deployments. Buyers who need a different form factor, a non-ECC configuration or a smaller capacity kit should look elsewhere.
Ciri-ciri utama
- 5 TB total capacity from sixteen 96 GB modules
- DDR5 5600 speed with CL46 latency runs at rated frequency
- Registered ECC design prevents silent data corruption under load
- 10 V operation matches the Supermicro H13SSF memory controller spec
- 288-pin RDIMM form factor fits the board's DIMM slots exactly
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 16X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
How do I install the 16 DDR5 RDIMMs into the Supermicro H13SSF and which population step is most often missed?
Populate all 16 slots following the motherboard manual's exact DIMM population order; the step most often missed is skipping the prescribed sequence, which prevents the 1.5 TB kit from being recognised at full capacity and rated speed.
What maintenance or replacement will the 1.5 TB DDR5 5600 ECC RDIMM kit need during its service life?
The modules have no heat spreader and no moving parts, so no routine maintenance is required; replacement is only needed if a DIMM fails, which the lifetime replacement warranty covers.
What limit appears first when the 16 x 96 GB 2Rx4 registered ECC kit runs sustained workloads on the H13SSF?
The memory controller's maximum supported capacity and rank-per-channel limit is reached first; the 1.5 TB kit matches the board's validated population rules, so sustained operation stays within that boundary.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



