Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Four green DDR5 RDIMM modules without heat spreaders, 288-pin registered ECC server memory kit

NEMIX RAM

NEMIX RAM DDR5 5600 512GB (4x128GB) ECC Registered RDIMM 2Rx4 CL46 1.1V Supermicro H13DSH memory upgrade

SKU CH-N8WK-PWPAV

A 512 GB DDR5 registered ECC memory kit with four 128 GB modules running at 5600 MT/s, CL46 and 1.1 V, validated for the Supermicro H13DSH motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

Lihat 30 konfigurasi lagi
  • 512 GB total capacity across four 128 GB modules for dense server memory
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation at 2Rx4 rank matches the motherboard's memory-controller requirements
  • Verified fit for Supermicro H13DSH with 288-pin RDIMM form factor required by the board

Capacity and purpose

This 512GB kit contains four 128GB DDR5 modules built for the Supermicro H13DSH motherboard. It targets servers that require maximum registered ECC capacity in every slot.

Registered ECC form factor

Each module is a 288-pin RDIMM with a 2Rx4 organisation and no heat spreader. The registered design buffers address and command signals so the memory controller remains stable when all channels are fully populated, while ECC corrects single-bit errors before they affect data integrity.

Voltage and timing

The kit operates at 1.1V with a CL46 latency at 5600 MT/s. Running at the standard DDR5 voltage keeps power draw predictable in dense configurations, and the rated timing is the exact value the platform expects for reliable operation.

Ciri-ciri utama

  • 512 GB total capacity across four 128 GB modules for dense server memory
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation at 2Rx4 rank matches the motherboard's memory-controller requirements
  • Verified fit for Supermicro H13DSH with 288-pin RDIMM form factor required by the board

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Does this DDR5-5600 RDIMM kit run at its rated 5600 MT/s on the Supermicro H13DSH, or does the board cap it lower?

The kit is spec-matched to the H13DSH memory controller, so all four 128 GB modules operate at DDR5-5600 (PC5-44800) with CL46 at 1.1 V when populated per the board's rules.

Will these 288-pin registered DIMMs physically fit the H13DSH slots without clearance issues?

Yes — each module is a standard 288-pin DDR5 RDIMM with no heat spreader, matching the exact form factor the H13DSH DIMM sockets require.

What is the correct population order for all four modules on the H13DSH, and what step do installers often miss?

Follow the motherboard manual's approved DIMM sequence for four 2Rx4 registered modules; the step most often missed is verifying the exact slot order before seating every DIMM.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.