SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
USD 391.99
0.00496655BTC
Ada stok
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
1.5 TB DDR5 6400 ECC registered RDIMM kit with twelve 128 GB 2Rx4 modules at CL52 and 1.1 V for Supermicro H14DSH
- Capacity1.5TB (12 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 5 TB total capacity from twelve 128 GB modules for maximum server memory density
- DDR5 6400 speed with CL52 latency delivers rated throughput for H14DSH workloads
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H14DSH DIMM sockets without adapters
Capacity and form factor
This kit delivers 1.5TB of DDR5 memory across twelve 128GB Registered ECC RDIMMs. Each module uses a 2Rx4 organization at 1.10V with CL52 timings and fits the 288-pin slot required by the Supermicro H14DSH motherboard.
Who this suits and who it does not
It suits administrators expanding a Supermicro H14DSH server to its maximum supported capacity with matched, registered ECC modules. Builders using consumer boards, workstations needing unbuffered UDIMMs, or systems limited to lower densities should look elsewhere.
What the kit changes
The twelve-module kit removes the guesswork of mixing ranks or speeds, letting the memory controller initialize every slot at the rated DDR5-6400 speed. Registered buffering and on-die ECC keep all channels stable under full load, preventing silent data errors that unbuffered memory cannot correct.
Ciri-ciri utama
- 5 TB total capacity from twelve 128 GB modules for maximum server memory density
- DDR5 6400 speed with CL52 latency delivers rated throughput for H14DSH workloads
- Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
- 1 V operation matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H14DSH DIMM sockets without adapters
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K12 |
| Capacity | 1.5TB (12 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB 12X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
My Supermicro H14DSH has 12 DDR5 slots — do I need to populate every slot for this 12-module kit to run at 6400 MT/s?
The kit is an exact-match 12×128 GB DDR5-6400 RDIMM set; the board must be filled according to its population rules so the memory controller sees the correct 2Rx4 rank layout at 1.1 V and CL52.
Will these 288-pin registered ECC RDIMMs work alongside any UDIMMs or SODIMMs I might already have in the server?
No — the H14DSH requires 288-pin DDR5 RDIMMs; UDIMMs and SODIMMs are physically and electrically incompatible and cannot be mixed in the same system.
After installing all twelve modules, how can I confirm the kit is running at its rated 6400 MT/s with ECC active?
Enter the BIOS or use a hardware-inventory tool and verify the memory speed shows DDR5-6400 (PC5-51200), CAS latency 52, voltage 1.1 V, and that ECC is reported as enabled for each DIMM.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
USD 74.99
0.00095013BTC
Ada stok