NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.1TB (12 x 96GB) 6400MHz CL52 2Rx4 Registered Supermicro H13SST-G
1.1 TB server memory kit with twelve 96 GB DDR5-6400 registered ECC modules validated for the Supermicro H13SST-G motherboard
- Capacity1.1TB (12 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1 TB total capacity from twelve 96 GB modules for dense server workloads
- DDR5-6400 speed with CL52 latency matches the board's rated timing
- Registered ECC architecture corrects single-bit errors and buffers every slot
- 10 V operation at 2Rx4 rank keeps power draw low at full population
- Verified fit for Supermicro H13SST-G motherboard with 288-pin RDIMM form factor
1.1TB DDR5 RDIMM kit for Supermicro H13SST-G
This 1.1TB kit contains twelve 96GB DDR5 6400MHz Registered ECC RDIMMs built to the exact voltage, rank and timing the Supermicro H13SST-G memory controller expects. It targets administrators who need maximum supported capacity on this specific platform without compatibility guesswork.
Registered ECC upgrade for full-slot population
The 2Rx4 Registered architecture offloads the memory controller so every slot can run fully populated at rated speed while ECC corrects single-bit errors on the fly. The jump is worth it when the workload demands the full 1.1TB at DDR5 6400 CL52 and the board's population rules require matched RDIMMs.
288-pin DDR5 form factor, no heat spreaders
Modules fit the 288-pin DDR5 RDIMM slots the H13SST-G provides and operate at 1.10V. The kit frees administrators from mixing capacities or ranks; it does not suit builds that need UDIMM, SODIMM or non-ECC memory, nor boards that cannot address 96GB per slot.
Ciri-ciri utama
- 1 TB total capacity from twelve 96 GB modules for dense server workloads
- DDR5-6400 speed with CL52 latency matches the board's rated timing
- Registered ECC architecture corrects single-bit errors and buffers every slot
- 10 V operation at 2Rx4 rank keeps power draw low at full population
- Verified fit for Supermicro H13SST-G motherboard with 288-pin RDIMM form factor
Spesifikasi
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K12 |
| Capacity | 1.1TB (12 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.1TB 12X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Soalan tentang produk ini
Will these 288-pin DDR5 RDIMMs fit the Supermicro H13SST-G memory slots?
Yes, the kit is an exact-match upgrade for the Supermicro H13SST-G motherboard and uses the 288-pin registered DDR5 form factor that board requires.
What population order should I follow when installing all twelve 96GB modules?
Consult the H13SST-G manual for the approved DIMM population sequence; the board’s memory-controller rules dictate which slots must be filled first for full 1.1 TB recognition.
Do the modules have a heat spreader that could need cleaning or replacement later?
No heat spreader is included on these RDIMMs, so there is no spreader to clean or replace during the product’s service life.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



