Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 4800MHz CL40 1.1V 2Rx4 Supermicro H14SHM

SKU CH-QB86-9458Z

1.5 TB DDR5 ECC registered DIMM kit with twelve 128 GB modules at 4800 MHz CL40 for Supermicro H14SHM servers

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

Lihat 24 konfigurasi lagi
  • 5 TB total capacity from twelve 128 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency at 1.1 V for rated performance
  • Registered ECC design with 2Rx4 organisation for full-population stability and error correction
  • 288-pin RDIMM form factor verified for Supermicro H14SHM motherboard compatibility
  • Major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

1.5 TB DDR5 ECC RDIMM kit for Supermicro H14SHM

This 1.5 TB kit contains twelve 128 GB DDR5 4800 MHz Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14SHM motherboard expects. It is intended for administrators who need maximum supported capacity in every slot of that specific platform.

DDR5-4800 Registered ECC limits

The modules run at DDR5 4800 (PC5-38400) with CL40 latency at 1.1 V using a 2Rx4 registered layout that offloads the memory controller so all twelve slots can operate at full capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption. The 288-pin RDIMM form factor is mandatory; UDIMM or SODIMM modules will not fit or function in this board.

Upgrade from partial or lower-capacity populations

Replacing a partially filled configuration or smaller RDIMMs with this fully populated 1.5 TB kit lets the server address the full memory ceiling the H14SHM supports. The jump is worth it when workloads demand the maximum registered ECC capacity the board can accept and the population rules allow all twelve slots to be used.

Ciri-ciri utama

  • 5 TB total capacity from twelve 128 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency at 1.1 V for rated performance
  • Registered ECC design with 2Rx4 organisation for full-population stability and error correction
  • 288-pin RDIMM form factor verified for Supermicro H14SHM motherboard compatibility
  • Major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Should I buy the 12-module 1.5TB kit or a smaller capacity?

The kit contains 12 modules of 128GB each for a total of 1.5TB. Choose this kit only if your Supermicro H14SHM motherboard supports 12 DIMM slots and the manual lists 128GB RDIMMs in the approved population order.

What does the 4800MHz rating mean once installed in the H14SHM?

The DDR5-4800 (PC5-38400) speed is the rated data rate. With 12 registered ECC modules installed, the memory controller will run the full kit at 4800MHz provided the motherboard firmware and CPU support that frequency at full population.

Is the 288-pin RDIMM interface compatible with the H14SHM and what limits apply?

Yes, the 288-pin RDIMM form factor matches the H14SHM slots. Registered buffering and ECC are required by this board; the 2Rx4 rank structure and 1.1V voltage must match the platform's memory-controller limits for full 1.5TB operation.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.