Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green DDR5 RDIMM circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 128GB 5600MHz CL46 2Rx4 1.1V 288-PIN Supermicro H14SSF memory upgrade

SKU CH-VFRE-2SP4T

128GB DDR5 ECC registered RDIMM at 5600MHz CL46, 2Rx4 1.1V, verified for Supermicro H14SSF servers

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

Lihat 24 konfigurasi lagi
  • Exact DDR5-5600 CL46 1.1V spec matches Supermicro H14SSF memory controller
  • Registered 2Rx4 ECC design runs every slot fully populated at 128GB
  • 288-pin RDIMM form factor fits the board's DIMM slots without adapters
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability
  • Lifetime replacement warranty with US-based technical support included

Exact-match server upgrade

This NEMIX RAM module provides a 128 GB DDR5 ECC Registered DIMM built to the precise specifications the Supermicro H14SSF motherboard expects. It arrives new and ready for installation in enterprise environments that require registered memory with error correction. The 288-pin form factor matches the board's DIMM slots exactly.

2Rx4 registered ECC at CL46

The single specification that determines fit is the 2Rx4 rank organisation combined with registered ECC operation at CL46 latency. This rank structure and buffering type must match the motherboard's memory-population rules; a UDIMM or different rank configuration will not be recognised at full capacity or rated speed.

Low-voltage DDR5 thermals

Operating at 1.1 V, the DDR5 modules draw minimal power for their density and run without a heat spreader in normal server airflow. Registered buffering reduces electrical load on the memory controller, helping maintain stable temperatures and quiet operation across fully populated channels.

Ciri-ciri utama

  • Exact DDR5-5600 CL46 1.1V spec matches Supermicro H14SSF memory controller
  • Registered 2Rx4 ECC design runs every slot fully populated at 128GB
  • 288-pin RDIMM form factor fits the board's DIMM slots without adapters
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability
  • Lifetime replacement warranty with US-based technical support included

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What does the 5600 MHz speed mean once this module is installed in a Supermicro H14SSF server?

The module runs at DDR5-5600 (PC5-44800) data rate with CL46 latency when the motherboard memory controller is configured for that speed.

How does the 288-pin RDIMM interface limit what this memory can do in practice?

The 288-pin Registered DIMM form factor is required by the H14SSF; it will not fit UDIMM or SODIMM slots and the registered buffer lets the board run every slot fully populated at rated capacity.

What physical clearance and slot requirements does this 128 GB kit need to fit?

It uses a standard-height 288-pin RDIMM PCB with no heat spreader, so it fits any H14SSF DIMM slot that accepts registered modules; verify the board's population order in the manual before installing.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.