Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM ME44800-328K1 32GB DDR5 5600 CL46 2Rx8 ECC UDIMM memory upgrade

SKU CH-9CCN-GT7EZ

32 GB DDR5 ECC UDIMM running at 5600 MT/s with CL46 latency, 1.1 V, 2Rx8 organisation and 288 pins for Supermicro X14SAE-F

  • Capacity32GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

  • ECC protection stops silent data corruption with on-the-fly single-bit error correction
  • Exact-match DDR5-5600 CL46 timing ensures full rated speed on Supermicro X14SAE-F
  • 2Rx8 unbuffered UDIMM form factor fits the board's required 288-pin slot layout
  • Major OEM chips from Samsung Micron Hynix deliver consistent reliability at 1.10V
  • 32GB capacity in a single kit simplifies memory population without mixing modules

Exact DDR5-5600 ECC UDIMM for Supermicro X14SAE-F

This 32 GB module matches the memory-controller specification for the Supermicro X14SAE-F motherboard. It runs at 5600 MT/s with CL46 latency at 1.1 V using a 2Rx8 unbuffered ECC design. The 288-pin DDR5 form factor is the only type that board accepts.

Verified fitment and ECC reliability

The kit is tested for exact-match compatibility so the system recognises the full 32 GB capacity at rated speed without manual tuning. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unexpected reboots during critical workloads.

Suited for Supermicro X14SAE-F builds needing ECC

Builders upgrading or populating a Supermicro X14SAE-F with DDR5 5600 ECC UDIMM memory will find this module purpose-matched. Systems that require registered DIMMs, SODIMMs, non-ECC memory, or a different DDR generation cannot use this part.

Ciri-ciri utama

  • ECC protection stops silent data corruption with on-the-fly single-bit error correction
  • Exact-match DDR5-5600 CL46 timing ensures full rated speed on Supermicro X14SAE-F
  • 2Rx8 unbuffered UDIMM form factor fits the board's required 288-pin slot layout
  • Major OEM chips from Samsung Micron Hynix deliver consistent reliability at 1.10V
  • 32GB capacity in a single kit simplifies memory population without mixing modules

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K1
Capacity32GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will the Samsung, Micron or Hynix chips on this 32 GB DDR5 5600 module need replacement during the system's life?

The module uses major OEM DRAM rated for continuous operation at 1.10 V and CL46; no user-serviceable parts exist, so replacement is only needed if a DIMM fails.

What limit appears first when this 2Rx8 ECC UDIMM runs sustained workloads at 5600 MT/s?

The memory controller enforces the JEDEC 5600 MT/s data rate and CL46 timing; bandwidth and latency ceilings are reached before thermal or voltage limits.

How much heat and power does this 288-pin DDR5 ECC UDIMM draw during all-day operation?

At the specified 1.10 V the kit draws only the power required for 5600 MT/s operation; with no heat spreader it relies on case airflow to stay within normal DDR5 thermal limits.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.