Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Four green circuit boards with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM MR51200-9624K4 384GB 4x96GB DDR5 6400 CL52 ECC RDIMM for Supermicro X14SDW-40C-SP9F

SKU CH-27TY-RBN7A

384 GB DDR5 ECC RDIMM kit of four 96 GB modules at 6400 MT/s CL52 1.1 V 288-pin registered for Supermicro X14SDW-40C-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

  • 384 GB total capacity from four 96 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-40C-SP9F without adapters

Exact-match upgrade for Supermicro X14SDW

This 384GB kit contains four 96GB DDR5 RDIMMs built to the precise rank, voltage and timing the Supermicro X14SDW-40C-SP9F memory controller expects. Registered ECC architecture offloads the controller so every slot runs fully populated at the rated 6400 MT/s speed. The modules arrive new and ready for installation in the 288-pin DDR5 slots your board requires.

Sustained-load behaviour

Registered buffering reduces electrical load on the memory controller, allowing all four DIMMs to operate continuously at 1.1V and CL52 without the signal degradation that can appear on unbuffered modules under heavy throughput. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during long production runs. The 2Rx4 organisation maintains bandwidth consistency across the full 384GB capacity.

288-pin DDR5 RDIMM form factor

Only the 288-pin Registered DDR5 form factor fits the Supermicro X14SDW-40C-SP9F; UDIMM or SODIMM modules will not seat or function. Verify your motherboard manual for supported capacities and approved population order before purchase.

Ciri-ciri utama

  • 384 GB total capacity from four 96 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 10 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-40C-SP9F without adapters

Spesifikasi

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How much power does each 96GB DDR5 6400 module draw at its rated 1.1V?

Each module operates at 1.1V as specified, which is the standard DDR5 voltage for registered ECC DIMMs; total system power will depend on the Supermicro X14SDW-40C-SP9F memory controller and population of all four slots.

Does the Supermicro X14SDW-40C-SP9F motherboard need a specific BIOS version or CPU to recognise this 384GB 4x96GB kit?

The kit is spec-matched to the Supermicro X14SDW-40C-SP9F for DDR5 6400 2Rx4 registered ECC at 1.1V; consult your motherboard manual for supported capacities, approved DIMM population order, and any required BIOS updates before installation.

Can I mix these 2Rx4 CL52 RDIMMs with older DDR5 ECC modules of different rank or latency on the same board?

Mixing ranks, latencies or voltages is not recommended; the board's memory controller expects uniform 2Rx4 CL52 1.1V registered DIMMs for stable operation across all populated slots.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.