OEM Industries
OEM Industries 1511FB-04W-B50 40mm 12V 0.46A 2-Wire CPU Cooler
A 40 mm square DC fan runs at 12 V and 0.46 A on a two-wire connection
- ColorBlack
- TypeFan only
- Fan Size40mm
- LEDNo
- Compact 40 mm frame fits tight builds
- 12 V 0.46 A draw keeps power use low
- Two-wire design simplifies motherboard connection
- NMB 3828 motor built for steady operation
- Black finish suits dark-themed systems
Compact 40 mm cooler for tight builds
The OEM Industries 1511FB-04W-B50 is a square DC fan designed for small-form-factor systems where space is at a premium. It suits builders assembling thin clients, embedded boards or low-profile servers that need active CPU cooling without a tall heatsink. The two-wire 12 V connection keeps wiring simple for basic motherboard headers or direct PSU taps.
0.46 A draw sets the thermal ceiling
At 12 V and 0.46 A the fan delivers modest airflow adequate for low-TDP processors or chipset heatsinks in well-ventilated chassis. It will struggle with sustained loads on mainstream desktop CPUs or any component exceeding its limited static pressure. The 40 mm frame leaves no room for larger blades, so peak cooling capacity is inherently constrained.
Black plastic frame with two-wire lead
The all-black housing blends into dark interiors and the lack of LEDs avoids unwanted light in rack or industrial environments. A fixed two-wire cable means speed control is limited to voltage regulation; PWM headers will run the fan at full speed unless the board supports voltage mode. Mounting holes follow the standard 40 mm square pattern for direct screw attachment.
Ciri-ciri utama
- Compact 40 mm frame fits tight builds
- 12 V 0.46 A draw keeps power use low
- Two-wire design simplifies motherboard connection
- NMB 3828 motor built for steady operation
- Black finish suits dark-themed systems
Spesifikasi
| Model | 1511FB-04W-B50 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| LED | No |
Soalan tentang produk ini
Will the 40 mm fan fit the same mounting holes as my existing 40 mm cooler?
The unit uses a standard 40 mm square frame, so it matches common 40 mm mounting patterns used on many small-form-factor boards.
How can I confirm the 12 V 0.46 A fan is spinning correctly after install?
Connect the two-wire lead to a 12 V header; the fan should start immediately and report a steady RPM in BIOS or monitoring software.
Does the package include mounting screws or only the fan itself?
The listing describes the item as a fan only, so screws, brackets or thermal paste are not included and must be sourced separately.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



