OEM Industries
OEM Industries 1606KL-05W-B39 40mm 24V 0.06A 3-Wire CPU Cooler
A 40 mm ball-bearing fan with a 3-wire 24 V 0.06 A connector for CPU cooling
- ColorBlack
- TypeFan only
- Fan Size40mm
- Bearing TypeBall
- Power Connector3 Wires
- LEDNo
- Compact 40 mm frame fits tight builds
- Ball bearing extends operational lifespan
- 24 V 0.06 A draw keeps power use low
- Three-wire connector enables speed monitoring
- NMB 4015 design delivers reliable airflow
40 mm 24 V Ball-Bearing Fan
This 40 mm square cooler uses an NMB 4015 motor running at 24 V and 0.06 A. The three-wire connector provides speed feedback for system monitoring. It is aimed at compact industrial or embedded builds that need a low-profile air mover.
Sustained Operation with Ball Bearing
The ball-bearing design maintains consistent rotation during continuous duty cycles. Steady 24 V input keeps airflow stable without the voltage droop seen in shorter bursts. No LED lighting means no extra thermal load inside tight enclosures.
Check Voltage Header and Clearance
Verify your board or controller supplies a 24 V three-pin header before ordering. Confirm the 40 mm footprint fits the mounting holes and that the 15 mm thickness clears adjacent components. The 3-wire plug must match the pinout expected by your fan controller.
Ciri-ciri utama
- Compact 40 mm frame fits tight builds
- Ball bearing extends operational lifespan
- 24 V 0.06 A draw keeps power use low
- Three-wire connector enables speed monitoring
- NMB 4015 design delivers reliable airflow
Spesifikasi
| Model | 1606KL-05W-B39 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 40mm |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| LED | No |
Soalan tentang produk ini
How much noise and heat does the 40 mm ball-bearing fan produce when running continuously at 24 V?
The 40 mm ball-bearing fan draws 0.06 A at 24 V, giving low power draw and modest airflow for continuous operation.
What connector and voltage source must my system already provide for this 3-wire cooler?
A 3-pin fan header supplying 24 V DC is required; the cooler has no built-in voltage converter.
Will the 40 mm square frame with 3-wire lead fit the mounting holes and fan header on my older motherboard?
The cooler uses a standard 40 mm square footprint and 3-wire connector, matching legacy 40 mm mounting patterns and headers.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001043BTC
Ada stok