Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two black DDR4 UDIMM modules without heat spreaders, 288-pin, 16GB kit

OWC

OWC 16GB (2x8GB) DDR4 2400 CL17 ECC Unbuffered UDIMM 1.2V 288-pin desktop RAM

SKU CH-3GES-P0CD6

A 16 GB dual-channel DDR4 kit at 2400 MHz with ECC, CL17 latency and 1.2 V operation for workstations, servers and NAS systems

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • ECC protection guards data integrity in workstations and servers
  • Dual-channel 16 GB kit (2 × 8 GB) boosts multitasking headroom
  • DDR4 2400 CL17 at 1.2 V delivers efficient speed
  • JEDEC-compliant unbuffered 288-pin UDIMM ensures broad compatibility
  • Backward compatible with 2133 MHz systems for flexible upgrades

Capacity and purpose

This kit provides 16GB of DDR4 memory across two 8GB modules. It is intended for workstations, servers and NAS systems that require error-correcting code support. The unbuffered design suits desktop-class boards that accept ECC UDIMMs.

Speed and standard limits

The modules run at 2400MHz with a CAS latency of 17 and operate at 1.2V. They conform to the PC4-19200 JEDEC specification and are backward compatible with 2133MHz systems. No higher frequencies or lower latencies are supported by this kit.

Build and connectors

Each stick uses a standard 288-pin UDIMM edge connector and has no heat spreader. The low-profile black PCB fits tight spaces in rackmount or small-form-factor chassis. Installation follows the usual DIMM slot procedure without extra clearance concerns.

Ciri-ciri utama

  • ECC protection guards data integrity in workstations and servers
  • Dual-channel 16 GB kit (2 × 8 GB) boosts multitasking headroom
  • DDR4 2400 CL17 at 1.2 V delivers efficient speed
  • JEDEC-compliant unbuffered 288-pin UDIMM ensures broad compatibility
  • Backward compatible with 2133 MHz systems for flexible upgrades

Spesifikasi

BrandOWC
Part Number2E4D41R8016P
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will this ECC memory work in my desktop PC?

The modules are unbuffered ECC UDIMMs built to JEDEC DDR4 2400 standards and listed as compatible with desktop PCs, workstations, servers and NAS systems, so they will work if your motherboard supports DDR4 ECC unbuffered memory.

Can I run the kit at 2133 MHz if my board does not support 2400 MHz?

Yes, the modules are backward compatible with 2133 MHz and will automatically down-clock to match the board's maximum supported speed.

Do I need a heat spreader for these sticks?

No, the modules ship without a heat spreader and operate at the standard 1.2 V; typical desktop airflow is sufficient for normal workloads.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.