Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board with gold contacts and black memory chips

OWC

OWC 2GB DDR3 1333 PC3-10600 CL9 1Rx8 240-pin 1.5V Non-ECC UDIMM for HP Elite 7100 7200 7300 8000 SFF Tower

SKU CH-1GPH-4RY2V

2 GB DDR3 1333 MHz UDIMM upgrades HP Elite 7100, 7200, 7300 and 8000 SFF or Tower systems

  • Capacity2GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 2GB capacity adds responsive multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches factory timing
  • 5V JEDEC standard voltage protects system stability
  • 240-pin unbuffered non-ECC fits HP Elite 7100 7200 7300 8000
  • 1Rx8 single-rank design simplifies upgrade installation

Targeted DDR3 Upgrade

This OWC module delivers 2GB of DDR3 1333 memory built to JEDEC PC3-10600 CL9 timings. It fits HP Elite 7100, 7200, 7300 and 8000 SFF or Tower systems that accept 240-pin unbuffered non-ECC DIMMs running at 1.5V.

DDR3 Platform Limits

DDR3 1333 caps peak bandwidth at the PC3-10600 rate, so data throughput cannot exceed what the memory controller and chipset allow for this generation. The single-rank 1Rx8 organisation helps compatibility but total system capacity stays bound by the number of slots and the maximum density each platform supports.

Straightforward Slot Installation

The 240-pin UDIMM drops into a standard desktop DIMM socket without tools; align the notch, press until the retention clips click, then power on. The most common issue is a partially seated module that prevents POST, so reseat firmly if the system beeps or shows no video.

Ciri-ciri utama

  • 2GB capacity adds responsive multitasking headroom
  • DDR3 1333 PC3-10600 CL9 matches factory timing
  • 5V JEDEC standard voltage protects system stability
  • 240-pin unbuffered non-ECC fits HP Elite 7100 7200 7300 8000
  • 1Rx8 single-rank design simplifies upgrade installation

Spesifikasi

BrandOWC
Part Number1U3D31R802GB
Capacity2GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP Elite 7100
HP Elite 7200
HP Elite 7300
HP Elite 8000 SFF
HP Elite 8000 Tower

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Should I choose the single 2GB module or look for a larger kit for my HP Elite 8000?

This listing is a single 2GB DDR3 1333 CL9 1.5V UDIMM. If your HP Elite 8000 has free slots, adding this module increases total memory by 2GB. For a larger increase, you would need additional modules of the same specification.

What does the PC3-10600 1333MHz rating deliver in my HP Elite 7200?

The module runs at 1333MHz with CL9 latency at 1.5V. In your HP Elite 7200 it will operate at the system's supported DDR3 speed, providing 2GB of non-ECC unbuffered memory for standard desktop workloads.

Does the 240-pin DDR3 interface limit the speed on my HP Elite 7300?

The 240-pin DDR3 UDIMM connects via the standard desktop memory bus. Your HP Elite 7300's chipset and BIOS determine the maximum supported frequency; this module is rated for 1333MHz (PC3-10600) at CL9.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.