Replace Power
Replace Power AP-MPS3ATX30-7 power supply 300W
300W ATX replacement supply for Dell PowerEdge SC430 and SC440 with 20+4-pin, 4-pin, three SATA, two peripheral and one floppy connector
- ColorGrey
- TypeATX
- Fans1
- Weight0.1
- 300W steady output for Dell PowerEdge SC430 SC440
- High-efficiency design keeps ripple and noise low
- Over-voltage protection safeguards connected components
- Single fan cools the grey ATX chassis
- Full connector set: 20+4-pin ATX, 4-pin CPU, SATA, peripheral, floppy
Purpose and fit
This 300 W ATX power supply replaces the original unit in Dell PowerEdge SC430 and SC440 servers. It fits builders who need a direct drop-in for those chassis or a basic ATX source for legacy systems.
Capacity and headroom
The unit delivers 300 W total output with a single fan for cooling. It handles a typical motherboard, CPU and a few drives, but leaves little margin for high-wattage graphics cards or large drive arrays.
Connector layout
Cabling includes one 20+4-pin ATX, one 4-pin ATX12V, three SATA, two peripheral and one floppy connector. Builds requiring additional PCIe power or more SATA leads will need adapters or a different supply.
Ciri-ciri utama
- 300W steady output for Dell PowerEdge SC430 SC440
- High-efficiency design keeps ripple and noise low
- Over-voltage protection safeguards connected components
- Single fan cools the grey ATX chassis
- Full connector set: 20+4-pin ATX, 4-pin CPU, SATA, peripheral, floppy
Spesifikasi
| Brand | Replace Power |
|---|---|
| Model | AP-MPS3ATX30-7 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Soalan tentang produk ini
Will the 20+4-pin ATX connector on this AP-MPS3ATX30-7 fit the motherboard in my older Dell PowerEdge SC430?
Yes, the 20+4-pin ATX connector is designed for the Dell PowerEdge SC430 and SC440 motherboards, providing the standard ATX power interface those systems require.
How can I confirm the 300W unit is delivering stable power once installed?
The supply includes output over-voltage protection and low ripple and noise ratings; a successful POST and stable operation under load indicate it is working as intended.
Which power cables come attached to the PSU and what might I need to add?
The unit provides a fixed 20+4-pin ATX cable, a 4-pin ATX12V cable, two peripheral connectors, one floppy connector and three SATA power connectors; no modular cables are included.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



