SAMSUNG
SAMSUNG 32GB DDR3 1066 1.35V 4Rx4 LP ECC LR DIMM
32 GB DDR3 1066 load-reduced ECC DIMM for high-density server memory configurations
- Capacity32GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1066 (PC3 8500)
- Voltage1.35V
- ECCYes
- Buffered/RegisteredLoad Reduced
- 32 GB capacity supports large server workloads
- DDR3 1066 speed delivers reliable data throughput
- 35 V low voltage reduces power draw
- Load Reduced ECC design improves signal integrity
- 4Rx4 240-pin layout fits compatible server slots
32GB DDR3 1066 Load Reduced DIMM
This 32GB DDR3 module runs at 1066 MT/s with a low 1.35 V supply. It uses a 240-pin form factor and carries ECC with Load Reduced buffering in a 4Rx4 layout. Supermicro certification confirms compatibility with qualified server platforms. The LP profile fits dense chassis where vertical space is limited.
Suits servers needing maximum capacity per slot
Systems that require registered ECC memory with Load Reduced technology to populate many DIMM slots will benefit from this module. Builds limited to standard registered DIMMs without Load Reduced support cannot use this part. Environments demanding higher clock speeds than 1066 MT/s must select faster modules.
Single specification check is DDR3 1066 speed grade
The module operates at PC3-8500 (1066 MT/s) and will not run at higher DDR3 frequencies unless the platform supports them. Verify the memory controller accepts 1.35 V operation and 4Rx4 Load Reduced organisation before ordering. No other DDR generation fits the 240-pin DDR3 socket.
Ciri-ciri utama
- 32 GB capacity supports large server workloads
- DDR3 1066 speed delivers reliable data throughput
- 35 V low voltage reduces power draw
- Load Reduced ECC design improves signal integrity
- 4Rx4 240-pin layout fits compatible server slots
Spesifikasi
| Brand | SuperMicro |
|---|---|
| Model | M386B4G70BM0-YK0 |
| Capacity | 32GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1066 (PC3 8500) |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
Soalan tentang produk ini
Will this 4Rx4 load-reduced DDR3 module work in a system that currently uses standard registered DIMMs?
Load-reduced and standard registered DIMMs use different signalling; mixing them is not supported and the system will not boot with both types installed together.
How can I confirm the module is running at DDR3 1066 after installation?
Enter the BIOS or use a system information tool; the memory speed should read 1066 MT/s (PC3 8500) and the voltage should show 1.35 V.
Does the package include any heatsinks, cables or a Supermicro certification card, or is it only the bare DIMM?
Only the 32 GB 240-pin DDR3 LR DIMM is supplied; no heatsink, cable or printed certification card is included.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



