SAMSUNG
SAMSUNG M393A4K40CB2-CTD 32GB DDR4 2666 ECC Registered server RAM
32GB DDR4 2666 ECC Registered 288-pin server memory with CL19 latency and 1.20V operation
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCYes
- Error-correcting code protects data integrity
- Registered signal buffering improves system stability
- 32GB capacity supports demanding server workloads
- DDR4 2666 speed delivers 21300 MT/s bandwidth
- Compatible with listed Supermicro motherboard models
32GB DDR4 ECC Registered module
This 32GB DDR4 module runs at 2666 MT/s with CL19 latency and 1.20V operation. It is built as a 288-pin dual-rank 2Rx4 registered DIMM with error-correcting code. The specification targets servers and workstations that require registered memory for stability.
Upgrade from non-ECC or unbuffered DIMMs
Systems using unbuffered or non-ECC memory cannot accept this registered module; the jump is only possible when the platform explicitly supports registered ECC DIMMs. The change is worth it when data integrity and multi-DIMM capacity scaling are required for the workload.
Verify motherboard qualification
Confirm the exact motherboard model appears on the supplier's compatible Supermicro list before ordering. Registered DIMMs must match the platform's rank and voltage requirements, and mixing registered with unbuffered memory is not supported.
Ciri-ciri utama
- Error-correcting code protects data integrity
- Registered signal buffering improves system stability
- 32GB capacity supports demanding server workloads
- DDR4 2666 speed delivers 21300 MT/s bandwidth
- Compatible with listed Supermicro motherboard models
Spesifikasi
| Brand | SAMSUNG |
|---|---|
| Model | M393A4K40CB2-CTD |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Features | Compatible Super micro MotherBoard model: X10DRC-LN4+, X10DRC-T4+ X10DRi-LN4+, X10DRi-T4+ X10DRT-P, X10DRT-PIBF, X10DRT-PIBQ, X10DRT-PT X10DRL-i, X10DRU-i+ X10DDW-i, X10DDW-iN X10DRT-H, X10DRT-HIBF X10DRH-C, X10DRH-CT, X10DRH-I, X10DRH-iT X10DRU-X, X10DRU-XLL X10DRD-iNTP, X10DRD-iTP, X10DRD-LTP X10DRT-L, X10DRT-LIBF, X10DRT-LIBQ X11DPT-PS X11DPi, X11DPi-N, X11DPi-NT, X11DPi-T X11DPU X10DGO, X10DGO-T X11SPW-CTF, X11SPW-TF X11DPT-B, X11DDW-L, X11DDW-NT B11DPT, B11DPT-P X11DAi-N X11SPL-F X11SPH-nCTF, X11SPH-nCTPF X11DPU-Z+ X11DPFR-S, X11DPFR-SN X11DPU-X, X11DPU-XLL X11DGQ H11DSU-i, H11D |
| Berat penghantaran | 0.11 kg |
| Dimensi bungkusan | 171 × 51 × 13 mm |
Soalan tentang produk ini
What slot type and pin count does this 32GB DDR4 2666 module require on the motherboard?
The module uses a standard 288-pin DDR4 DIMM slot; it fits any server board that accepts registered DDR4 memory at 1.20V.
Which step is most often missed when installing this registered ECC memory on a Supermicro X10 or X11 board?
After seating the DIMM fully until the ejector tabs click, you must enter the BIOS and verify that the memory is running at DDR4 2666 with CL19 timings and that ECC is enabled.
What indicates that a dual-rank 2Rx4 module like this one should be replaced during routine server maintenance?
Persistent corrected ECC errors logged by the BMC or OS, or any uncorrectable memory fault that causes a system halt, signal that the module should be swapped out.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



