Seagate
Seagate Exos 10E2400 1.2TB 10000 RPM SAS 12Gb/s 2.5" internal hard drive ST1200MM0039Product
A 1.2 TB enterprise hard drive spinning at 10000 RPM with a SAS 12Gb/s interface and 128 MB buffer in a 2.5 inch form factor
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity1.2TB
- NAND Flash Memory TypeHard Drive
- RPM10000 RPM
- Form Factor2.5"
- 2 TB capacity for high-density enterprise storage
- 10000 RPM spindle speed accelerates random I/O workloads
- SAS 12Gb/s interface delivers 12 Gb/s host throughput
- 128 MB cache buffers burst traffic for consistent latency
- 5 inch form factor fits dense server chassis
1.2 TB SAS 12Gb/s 10K RPM Drive
The Seagate Exos 10E2400 is a 1.2 TB enterprise hard drive with a 12Gb/s SAS interface and 10,000 RPM spindle speed. It uses a 2.5-inch form factor and includes a 128 MB buffer. The drive is supplied new in bare-drive packaging.
Suited For SAS 12Gb/s Bays
This drive suits servers and storage arrays that accept 2.5-inch SAS drives running at 12Gb/s. It is not for systems that only support slower SAS link rates or larger 3.5-inch drive bays. Buyers needing higher capacity than 1.2 TB should consider other models.
12Gb/s SAS Interface Decides Fit
The single specification that decides compatibility is the 12Gb/s SAS interface. The host controller and backplane must support this exact signalling rate for the drive to operate at its rated performance.
Ciri-ciri utama
- 2 TB capacity for high-density enterprise storage
- 10000 RPM spindle speed accelerates random I/O workloads
- SAS 12Gb/s interface delivers 12 Gb/s host throughput
- 128 MB cache buffers burst traffic for consistent latency
- 5 inch form factor fits dense server chassis
Spesifikasi
| Brand | Seagate |
|---|---|
| Model | ST1200MM0039 |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 1.2TB |
| NAND Flash Memory Type | Hard Drive |
| RPM | 10000 RPM |
| Form Factor | 2.5" |
Soalan tentang produk ini
Will the 2.5-inch form factor and .6-inch height fit my server drive bay?
The drive measures 2.5 inches wide, 4 inches deep and .6 inches high, matching the standard 2.5-inch enterprise bay dimensions.
What is the correct way to connect the SAS 12Gb/s interface during installation?
Attach a SAS 12Gb/s cable or seat the drive in a SAS backplane; the dual-port connector must be fully engaged for both channels to initialise.
When should I expect to replace the 128 MB cache buffer or the drive itself?
The 128 MB buffer is integrated and not user-replaceable; plan to replace the entire drive when SMART attributes indicate wear or after the rated workload limit is reached.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



