Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Pair of silver metal sliding rails with ball-bearing tracks and mounting brackets

Silverstone Technology

Silverstone Technology RMS05-22 Tool-Less Ball Bearing Sliding Rail kit case accessory

SKU CH-AG3H-JM6C0

Tool-less sliding rail kit supports 3U or 4U rackmount chassis up to 35 kg

  • Chassis TypeDesktop
  • Tool-less ball-bearing rails install in seconds without tools
  • Supports 440 mm wide 3U or 4U rackmount chassis
  • Holds up to 77.16 lb (35 kg) for heavy equipment
  • Adjustable depth 23.5" ~ 36.5" (595 ~ 936 mm) fits varied cabinets
  • Designed specifically for SilverStone RM44 and RM51 chassis

Tool-Less Sliding Rail Kit for RM44 and RM51

This sliding rail kit provides a tool-less mounting solution for SilverStone RM44 and RM51 rackmount chassis. It includes left and right rails that slide smoothly on ball bearings. The kit is designed for 3U or 4U chassis up to 440mm wide. It suits installers who need quick deployment in standard rack cabinets.

Mounting Hole Range 23.5 to 36.5 Inches

The rails adjust to fit rack cabinets with mounting hole distances between 23.5 and 36.5 inches (595 to 936mm). This single dimension decides whether the kit matches your rack. If your cabinet falls outside this range the rails will not align. Verify the spacing before ordering.

35kg Static Load Capacity

Each kit supports a maximum static load of 35kg (77.16 pounds) when the chassis is fully extended on the rails. The ball-bearing mechanism maintains smooth travel under this weight during installation and service. The rating applies to the stationary rack, not to shock or vibration during transport.

Ciri-ciri utama

  • Tool-less ball-bearing rails install in seconds without tools
  • Supports 440 mm wide 3U or 4U rackmount chassis
  • Holds up to 77.16 lb (35 kg) for heavy equipment
  • Adjustable depth 23.5" ~ 36.5" (595 ~ 936 mm) fits varied cabinets
  • Designed specifically for SilverStone RM44 and RM51 chassis

Spesifikasi

Chassis TypeDesktop

Soalan tentang produk ini

How much weight can the RMS05-22 rails actually support when a chassis is fully loaded?

The rails are rated for a maximum load of 77.16 pounds (35kg), so a fully populated 3U or 4U chassis up to that weight will be held securely.

What rack depths does the sliding rail kit accommodate?

The kit fits rack cabinets with mounting-hole spacings from 23.5" to 36.5" (595 mm to 936 mm), covering most standard server racks.

Will these rails bolt directly into my SilverStone RM44 or RM51 chassis?

Yes, the RMS05-22 is designed specifically for the RM44 and RM51 rackmount chassis and includes both left and right rails for tool-less installation.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.