SXDOOL
SXDOOL FFB0812EHE 80mm 5700RPM 3-pin case fan
Delivers 102.02 CFM at 5700 RPM with a 30 cm 3-pin lead for high-airflow cooling
- Fan Size80mm
- RPM5500-5999 RPM
- Air Flow>80 CFM
- Power Connector3 Pin
- 02 CFM airflow moves heat fast
- 5700 RPM speed pushes air through tight spaces
- 30 cm 3-pin lead reaches motherboard headers easily
- 35 A draw fits standard 12 V fan headers
- 80 × 80 × 38 mm frame fits standard 80 mm mounts
High-speed 80 mm case fan
The SXDOOL FFB0812EHE is a 12 V DC fan built for systems that need strong airflow through an 80 mm mount. It suits PC cases, servers, power supplies and communication equipment where space is tight but cooling demand is high.
Sustained airflow at 5700 RPM
At 5700 RPM the fan moves 102.02 CFM while drawing 1.35 A and 16.2 W, so output remains stable during continuous operation rather than dropping after a short burst. The 38 mm thickness houses a motor rated for that load without throttling.
Replaces lower-CFM 80 mm fans
Builders swapping a quieter but weaker 80 mm unit gain immediate headroom for hotter components or restricted venting. The 30 cm lead reaches most motherboard headers without adapters, while the 3-pin connector keeps control simple for boards that lack PWM headers.
Ciri-ciri utama
- 02 CFM airflow moves heat fast
- 5700 RPM speed pushes air through tight spaces
- 30 cm 3-pin lead reaches motherboard headers easily
- 35 A draw fits standard 12 V fan headers
- 80 × 80 × 38 mm frame fits standard 80 mm mounts
Spesifikasi
| Fan Size | 80mm |
|---|---|
| RPM | 5500-5999 RPM |
| Air Flow | >80 CFM |
| Power Connector | 3 Pin |
Soalan tentang produk ini
How loud and hot does the 5700 RPM fan get during continuous operation?
The fan draws 16.2 W at 12 V and spins at 5700 RPM, so expect noticeable airflow noise and measurable heat output under sustained load.
Does the 30 cm 3-pin cable reach my motherboard header without an extension?
The lead is extended to 30 cm from the original few centimetres, designed to plug straight into a standard motherboard 3-pin header.
Will the 80 × 80 × 38 mm frame fit the same mounting holes as my older 80 mm fan?
Yes — the 80 mm square footprint and 38 mm thickness match the legacy 8038 form factor used in many older cases and power supplies.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



