Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black standalone SATA duplicator with 24 hot-swap slots and LCD screen

Systor

Systor 1:24 SATA Duplicator & Sanitizer SYS2024HS-DP

SKU CH-DFRJ-7PJ9J

Standalone SATA duplicator copies and sanitises up to 24 drives at 150 MB/s with DoD 5220.22-M compliance

  • TypeHard Drive Duplicator
  • Target1 to 24
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 24

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Duplicates one source to 24 targets simultaneously
  • Copies at up to 150 MB/s for fast throughput
  • Sanitises drives to DoD 5220.22-M compliance standard
  • Operates standalone with no host computer required
  • Accepts 2.5" and 3.5" SATA drives without adapters

Duplicator for 24 SATA drives

The Systor SYS2024HS-DP is a standalone hard-drive duplicator that copies one source drive to up to 24 targets simultaneously. It accepts both 2.5 and 3.5 inch SATA hard drives and solid-state drives without adapters and operates without a host computer or software. Data transfer reaches 9.0 GB per minute (150 MB per second) with 128 MB of buffer memory.

Check your drives and power

Verify that every source and target drive uses a standard SATA connector and fits the 2.5 or 3.5 inch form factor. The unit requires a mains supply of 115 or 230 V at 50 or 60 Hz and draws up to 800 W from dual 400 W internal power supplies. No host system, operating system or additional cabling is needed for operation.

Cooling, noise and power draw

Built-in 40 mm rear fans and a dedicated outtake fan per drive bay provide active airflow across all 24 slots during long copy or erase sessions. The dual 400 W power supplies are rated for continuous operation at the full 800 W load. An LCD screen reports real-time status so you can monitor progress without opening the enclosure.

Ciri-ciri utama

  • Duplicates one source to 24 targets simultaneously
  • Copies at up to 150 MB/s for fast throughput
  • Sanitises drives to DoD 5220.22-M compliance standard
  • Operates standalone with no host computer required
  • Accepts 2.5" and 3.5" SATA drives without adapters

Spesifikasi

BrandSystor
ModelSYS2024HS-DP
TypeHard Drive Duplicator
Target1 to 24
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 800 W (400w x2)
Package Contentssee pictures for details

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What comes in the box and do I need separate adapters for 2.5" and 3.5" drives?

The duplicator accepts both 2.5" and 3.5" SATA drives directly with no adapters required; package contents are shown in the product images.

Should I choose the Systems and Files mode or the Whole HDD mode for my copy job?

Systems and Files copies only the used data area to save time, while Whole HDD copies every sector including empty space for a bit-for-bit clone.

What does the 9.0 GB/min (150 MB/s) transfer rate mean when the duplicator is running?

It is the maximum sustained copy speed the hardware can deliver per target port under ideal conditions with fast SATA drives.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.