WMtec
WMtec PWS-1K41P-1R 1400W 1U Redundant Server Power Supply
Delivers 1100 W at 100-140 Vac or 1400 W at 180-240 Vac in a hot-swap 1U module
- Delivers 1400 W at 180-240 Vac for high-density servers
- Redundant 1U design fits 76 x 336 x 40 mm bays
- 80 Plus Gold efficiency lowers energy costs
- Wide 100-240 Vac input supports global deployments
- Gold finger output enables hot-swap replacement
1400W 1U redundant PSU
The WMtec PWS-1K41P-1R is a 1U form-factor redundant power supply rated for 1400W output at high-line input. It targets server integrators and data-centre operators who need hot-swap capability in a compact rack chassis.
Check input voltage and gold-finger mating
The unit delivers 1100W on 100-140Vac at up to 13.5A and 1400W on 180-240Vac at up to 9.5A. Verify your rack PDU and mains circuit match the required range before ordering. The output uses a gold-finger edge connector, so the backplane or chassis must provide the matching socket; no standard ATX cables are included.
1U depth and hot-swap practicality
At 76mm wide, 336mm long and 40mm high the supply fits a standard 1U slot and leaves clearance for adjacent modules. The redundant design allows one module to be replaced while the other maintains power, reducing downtime during maintenance. Gold-finger contacts are rated for repeated insertion cycles typical of hot-swap server environments.
Ciri-ciri utama
- Delivers 1400 W at 180-240 Vac for high-density servers
- Redundant 1U design fits 76 x 336 x 40 mm bays
- 80 Plus Gold efficiency lowers energy costs
- Wide 100-240 Vac input supports global deployments
- Gold finger output enables hot-swap replacement
Spesifikasi
Belum ada spesifikasi diterbitkan untuk produk ini.
Soalan tentang produk ini
Does the PWS-1K41P-1R ship with mounting rails or cables, or must they be purchased separately?
The unit uses a gold-finger edge connector that mates with a compatible hot-swap backplane; rails and cables are not included and must be sourced to match the chassis.
Should I choose the 1100 W or 1400 W rating for my rack?
At 100–140 Vac input the supply delivers 1100 W; at 180–240 Vac it delivers 1400 W. Select the rating that matches your facility voltage.
What does the 1400 W figure mean once the PSU is installed in a server?
It is the maximum continuous output available when the unit is fed 180–240 Vac; at lower line voltage the same hardware is limited to 1100 W.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



