Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

Zyvpee

Zyvpee 5915PC-23T-B30 172×38 mm 230 V AC axial case fan

SKU CH-WGYT-WNC0S

A 172 × 38 mm AC axial fan running on 230 V mains with a two-pin connector and dual ball bearings

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size170mm
  • Bearing Type2 Ball
  • Power Connector2 Pin
  • ColorBlack
  • Runs on standard 230 V mains without extra PSU
  • Dual ball bearings extend operating life under continuous load
  • 172 mm frame fits 170 mm mounting holes in most cases
  • 35 W draw keeps inverter or UPS sizing simple
  • Two-pin connector enables quick plug-and-play installation

172 × 38 mm AC axial case fan

The Zyvpee 5915PC-23T-B30 is a 230 V AC axial fan built for case cooling in industrial or server enclosures. It runs directly from mains power using a two-pin connector and draws 35 W in single-phase operation. The 170 mm class frame uses a dual-ball bearing for continuous duty. No LED lighting is fitted.

Replaces smaller DC fans needing external power

This unit removes the need for a separate DC power brick or motherboard header when 230 V AC is already available in the chassis. The jump is worth it when you want a single-component airflow solution that connects straight to facility power. It is not suited for builders who need PWM speed control or standard 12 V DC motherboard control.

Verify 230 V AC supply

Confirm the enclosure provides a 230 V AC feed and that the two-pin connector matches your wiring harness. Check that the 172 mm by 38 mm footprint clears surrounding components and cable runs. The fan is not designed for low-voltage DC systems or headers limited to 12 V operation.

Ciri-ciri utama

  • Runs on standard 230 V mains without extra PSU
  • Dual ball bearings extend operating life under continuous load
  • 172 mm frame fits 170 mm mounting holes in most cases
  • 35 W draw keeps inverter or UPS sizing simple
  • Two-pin connector enables quick plug-and-play installation

Spesifikasi

Series5915PC-23T-B30
Model5915PC-23T-B30
TypeCase Fan
CompatibilityCase
Fan Size170mm
Bearing Type2 Ball
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesAC Axial Fan
Dimensions172*38mm

Soalan tentang produk ini

What clearance does the 172 mm by 38 mm frame need inside a case?

The fan measures 172 mm square and 38 mm thick, so allow at least that much unobstructed space behind the mounting panel.

How do I connect the 2-pin 230 V AC supply without reversing the leads?

The two pins carry live and neutral; either orientation works for this single-phase AC motor, but always isolate mains power before wiring.

When should the dual ball bearings be inspected or the fan replaced?

Dual ball bearings typically run for years; plan a visual check and spin test after several seasons of continuous 35 W operation.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.