Zyvpee
Zyvpee AD0824UB-A71GL 8025 24V 0.26A 80mm Ball Bearing Case Fan
80 mm ball-bearing case fan runs on 24 V at 0.26 A with a two-pin connector
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- Ball bearing design reduces wear for longer service life
- 24 V DC input matches industrial and server power rails
- 26 A draw keeps power consumption low
- 80 mm square frame fits standard case mounting points
- Two-pin connector enables simple plug-in installation
24 V 80 mm Ball Bearing Fan
The Zyvpee AD0824UB-A71GL is a DC axial case fan built for 24 V systems. It uses a dual ball bearing and a two-pin power connector. The frame measures 80 by 80 by 25 mm and has no LED lighting. It is suited to industrial or server chassis that specify this voltage and form factor.
Not for Builders Needing PWM or RGB
This unit runs at a fixed speed because it lacks a PWM wire. It is not for systems that require motherboard fan-curve control. The absence of LEDs makes it unsuitable for showcase builds that rely on internal lighting. Buyers who need a different voltage or a larger frame should select another model.
24 V Two-Pin Power Requirement
The fan draws 0.26 A from a 24 V supply through a standard two-pin header. Verify that your chassis or controller provides exactly this voltage and connector before purchase. Using a different voltage will prevent the fan from operating correctly.
Ciri-ciri utama
- Ball bearing design reduces wear for longer service life
- 24 V DC input matches industrial and server power rails
- 26 A draw keeps power consumption low
- 80 mm square frame fits standard case mounting points
- Two-pin connector enables simple plug-in installation
Spesifikasi
| Series | AD0824UB-A71GL |
|---|---|
| Model | AD0824UB-A71GL |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 80*80*25mm |
Soalan tentang produk ini
What voltage supply does the 24V 0.26A fan need to run?
The fan requires a 24 V DC power source capable of delivering at least 0.26 A.
Will the 2-pin connector fit my older 3-pin motherboard header?
Yes, the 2-pin plug can be inserted into a 3-pin header; the fan will run at full speed without PWM control.
How can I confirm the AD0824UB-A71GL is spinning correctly after installation?
Visually check that the blades rotate smoothly and listen for steady airflow without rattling from the dual ball bearing.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001044BTC
Ada stok