Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black 60×60×15 mm square case fan, 3-pin connector, no LED

Zyvpee

Zyvpee D06R-24SS1 04B 60×60×15mm 24V 0.12A 3-pin case fan

SKU CH-E382-ZBG7Z

60 mm square dual-ball-bearing case fan running on 24 V with a three-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • NIDEC 6015 motor delivers reliable airflow
  • 24V 0.12A design keeps power draw low
  • Dual ball bearing extends operational lifespan
  • 60×60×15mm frame fits tight 6cm mounts
  • 3-pin connector enables simple motherboard control

Compact 60 mm case fan for 24 V systems

This 60×60×15 mm fan runs on 24 V at 0.12 A and uses a three-pin power connector. The two-ball bearing and DC square cooler design suit industrial or inverter cooling applications. It is intended for builders who need a small, non-LED fan in a standard 6 cm frame.

Three-pin connector limits speed reporting

The three-pin interface supplies power and a tachometer signal but lacks PWM control. Fan speed varies only with voltage changes, so the motherboard or controller must support voltage regulation. Systems that require four-pin PWM headers cannot adjust this fan automatically.

Verify 24 V header and 60 mm mounting before

Check that your chassis has 60 mm mounting holes and that the fan header provides 24 V DC. A 12 V header will not drive the motor correctly. Builders needing PWM control, LED lighting, or larger frame sizes should consider other models.

Ciri-ciri utama

  • NIDEC 6015 motor delivers reliable airflow
  • 24V 0.12A design keeps power draw low
  • Dual ball bearing extends operational lifespan
  • 60×60×15mm frame fits tight 6cm mounts
  • 3-pin connector enables simple motherboard control

Spesifikasi

SeriesD06R-24SS1 04B
ModelD06R-24SS1 04B
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*15mm

Soalan tentang produk ini

What does the 24 V 0.12 A rating mean for my power supply?

The fan draws 0.12 A at 24 V, so your supply must provide a stable 24 V rail with at least that much current headroom.

How does the 60 × 60 × 15 mm size fit in a typical case?

It matches the standard 60 mm mounting pattern, so it bolts directly to any 60 mm fan grille or radiator without adapters.

What does the 3-pin connector control?

The three pins carry power, ground and a tachometer signal, allowing the motherboard to monitor speed but not to vary voltage.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.