Zyvpee
Zyvpee DS09225B12L P150 92x25mm 4 Pin case fan
A 92 by 25 millimetre case fan with a four-pin connector and ball bearing for CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPu Cooling
- Ball bearing for durable operation
- 92×25 mm frame fits standard 92 mm mounts
- 4-pin PWM connector enables precise speed control
- 12 V, 0.13 A rating keeps power draw low
- Non-LED black design suits minimalist builds
Compact 92 mm Frame
The Zyvpee DS09225B12L P150 is a 92 mm square case fan with a 25 mm thickness. It runs on 12 V and draws 0.13 A through a four-pin power connector. The black frame carries no LED lighting and uses a ball bearing for rotation.
Builders with Tight Clearances
This fan suits chassis or coolers that only accept a 92 mm mounting pattern and need PWM speed control via the fourth wire. It is not for systems that require higher airflow volumes or builders who prefer fluid-dynamic or rifle bearings for quieter operation.
Four-Pin PWM Connector
The 4-pin header enables motherboard-controlled speed curves so the fan can run quietly at idle and ramp up under load. Without this connector the fan would run at a fixed 12 V speed, limiting thermal flexibility in compact builds.
Ciri-ciri utama
- Ball bearing for durable operation
- 92×25 mm frame fits standard 92 mm mounts
- 4-pin PWM connector enables precise speed control
- 12 V, 0.13 A rating keeps power draw low
- Non-LED black design suits minimalist builds
Spesifikasi
| Brand | 3ccooler.com |
|---|---|
| Series | DS09225B12L P150 |
| Model | DS09225B12L |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPu Cooling |
| Dimensions | 92*25mm |
Soalan tentang produk ini
Which 92 mm version should I choose for a 12 V header?
The DS09225B12L P150 runs on 12 V and draws .13 A, matching standard 4-pin CPU or chassis headers without adapters.
What does the 150 figure tell me about airflow in my build?
The P150 designation reflects the model's speed target, delivering enough static pressure for heatsink or rear-exhaust use in typical mid-tower cases.
How does the 4-pin connector control the fan in practice?
The 4-pin PWM header lets the motherboard vary speed automatically based on temperature, while the fourth wire reports real-time RPM to the BIOS.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.0000105BTC
Ada stok