Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black 90mm square case fan, 38mm thick, two-pin connector

Zyvpee

Zyvpee PMD2409PMB1-A 9238 24V 12.2W 90mm 38mm 2-pin case fan

SKU CH-Y0KS-J8209

A 90 mm square case fan with dual ball bearings, 24 V power and a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 24 V 12.2 W power draw suits server chassis
  • 90 × 90 × 38 mm square frame fits standard 9 cm mounts
  • Dual ball-bearing design extends operating life
  • Two-pin 24 V connector simplifies wiring
  • Non-LED black housing keeps builds clean

Zyvpee 24V 90mm Server Fan

The Zyvpee PMD2409PMB1-A is a 90 by 90 by 38 millimetre case fan built for server and industrial chassis. It runs on a 24 volt supply and draws 12.2 watts through a two-pin connector. The dual ball bearing and non-LED black frame suit continuous-duty environments where simple, reliable airflow is the priority.

Build Integration

The square 90 millimetre footprint matches standard 9238 mounting holes so the fan drops into compatible server cases or inverter enclosures without adapters. Two-wire power means no PWM control or speed reporting; the motherboard or fan controller must provide a steady 24 volt source. Clearance of 38 millimetres in depth is required behind the mounting plane.

Thermals and Power

At 12.2 watts the fan delivers strong static pressure for dense heatsinks or restricted vent paths while the dual ball bearing keeps acoustic output steady over long runs. Power draw is fixed at the rated 24 volt 12.2 watt level because the two-pin design cannot throttle. Expect consistent airflow and noise characteristics as long as the supply voltage remains stable.

Ciri-ciri utama

  • 24 V 12.2 W power draw suits server chassis
  • 90 × 90 × 38 mm square frame fits standard 9 cm mounts
  • Dual ball-bearing design extends operating life
  • Two-pin 24 V connector simplifies wiring
  • Non-LED black housing keeps builds clean

Spesifikasi

SeriesPMD2409PMB1-A
ModelPMD2409PMB1-A
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions90*90*38mm

Soalan tentang produk ini

What is the maximum power draw of the 24 V motor under continuous load?

The motor is rated at 12.2 W at 24 V, which is the steady-state power it will draw when running constantly.

How much heat does the fan add to the chassis during all-day operation?

At 12.2 W the fan itself dissipates that much heat into the case, so sustained use adds roughly 12 watts to the internal thermal load.

What voltage source must the system provide for the 2-pin connector?

The fan requires a 24 V DC supply on its 2-pin header; a 12 V header will not run it correctly.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.