Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Four green DDR3 ECC UDIMM modules 240-pin 1.5V

A-Tech

A-Tech 32GB (4x8GB) DDR3 1866 ECC UDIMM 2Rx8 1.5V Server RAM

SKU CH-MN32-51T9J

A 32 GB quad-channel DDR3 1866 kit with ECC, CL13 latency and 1.5 V unbuffered DIMMs for compatible servers and workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (4 x 8GB)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz CL13 speeds up data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 2Rx8 dual-rank modules increase memory density per slot
  • 5 V standard voltage matches DDR3 platform requirements

A-Tech 32GB DDR3 1866 ECC Kit

This 32GB kit contains four 8GB DDR3 1866 ECC UDIMM modules built for servers and workstations that require error-correcting unbuffered memory. It suits administrators upgrading compatible platforms to handle larger workloads and improve system responsiveness.

Upgrading from lower-capacity DDR3 ECC UDIMM sets

The jump makes sense when your current configuration limits multitasking or virtualisation performance and the motherboard supports quad-channel DDR3 1866 operation. Verify that the system accepts 2Rx8 modules at 1.5V before purchasing.

Installing four 240-pin DIMMs in matched channels

Seat each module firmly until the retention clips engage and follow the motherboard manual for quad-channel population order. Common issues include mixing ranks or voltages and populating slots in the wrong sequence.

Öne çıkanlar

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1866 MHz CL13 speeds up data throughput
  • ECC unbuffered design detects and corrects memory errors
  • 2Rx8 dual-rank modules increase memory density per slot
  • 5 V standard voltage matches DDR3 platform requirements

Teknik özellikler

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC3-14900E
Capacity32GB (4 x 8GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

What physical slot does this 240-pin DDR3 ECC UDIMM kit require on the server or workstation motherboard?

The kit uses standard DDR3 DIMM slots with 240 pins; each module is an unbuffered ECC UDIMM that fits only in DDR3 server or workstation boards, not in desktop or laptop sockets.

How do I install the four modules for correct quad-channel operation and what step is often missed?

Populate all four slots in the same channel set as shown in the system manual; the step most often missed is confirming the motherboard's quad-channel population order before seating the modules.

When should I expect to replace these 1.5 V DDR3 1866 modules in a typical server workload?

DDR3 ECC UDIMMs have no scheduled replacement interval; they remain in service until a module fails, capacity needs exceed 32 GB, or the platform is upgraded to a newer memory generation.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.