SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00496033BTC
Stokta
A-Tech
A-Tech 32GB DDR4 3200MHz CL22 260-Pin SO-DIMM Laptop RAM
32GB DDR4 3200MHz CL22 SO-DIMM laptop memory upgrade with 260-pin form factor and 1.2V operation
- Capacity32GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 32 GB capacity lets you run heavier workloads
- DDR4 3200 MHz speed moves data faster
- CL22 latency keeps timing tight
- 20 V operation matches standard laptop power
- 260-pin SO-DIMM fits DDR4 laptop slots
32GB DDR4 3200 SO-DIMM
This module is a 32GB DDR4 3200MHz CL22 SO-DIMM built for laptop and all-in-one upgrades. It runs at 1.20V and uses 260-pin unbuffered non-ECC memory with major-brand chips. The kit contains a single stick ready to install.
Suits owners of compatible DDR4 laptops needing
Buyers whose system limits each slot to a lower capacity cannot use this module. Machines that require ECC or registered memory are not supported. Verify your laptop's maximum per-slot limit before ordering.
Capacity 32GB per module
The single-stick 32GB density is the specification that determines fit. If your board only accepts smaller modules this upgrade will not work. Check the manufacturer's qualified vendor list for 32GB SO-DIMM support.
Öne çıkanlar
- 32 GB capacity lets you run heavier workloads
- DDR4 3200 MHz speed moves data faster
- CL22 latency keeps timing tight
- 20 V operation matches standard laptop power
- 260-pin SO-DIMM fits DDR4 laptop slots
Teknik özellikler
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Bu ürünle ilgili sorular
Will this 260-pin DDR4 SO-DIMM fit my laptop's memory slot?
This module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any laptop or all-in-one system that accepts DDR4 SO-DIMM memory at 1.2V.
What is the correct way to seat this 32GB module, and what step do people often miss?
Power off the laptop, disconnect the battery if possible, open the memory compartment, align the notch on the module with the slot key, insert at a slight angle, then press down firmly until both side clips click into place.
Does this non-ECC unbuffered DDR4 module need any firmware updates or periodic replacement?
No firmware updates are required for this memory. It is a passive component with no moving parts and does not need scheduled replacement under normal use.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
