SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00498905BTC
Stokta
A-Tech
A-Tech 4GB DDR3 1333 PC3-10600 CL9 1.5V 240-Pin DIMM Desktop RAM
A 4GB DDR3 1333MHz PC3-10600 CL9 1.5V 240-pin DIMM desktop memory upgrade for AMD and Intel systems
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- Tested Frequency1333
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- Boosts system responsiveness with a 4GB DDR3 1333MHz module
- Runs at standard 1.5V for broad desktop compatibility
- Unbuffered non-ECC design fits typical consumer motherboards
- Uses major-brand chips tested for dependable operation
- Direct replacement for Crucial BL51264BA1339 and BLT4G3D1337DT1TX0
4GB DDR3 1333 Desktop DIMM
This single 4GB DDR3 module runs at 1333 MHz with a CAS latency of CL9 and operates at the standard 1.5V. It is built as an unbuffered, non-ECC DIMM using major-brand chips and is intended for desktop systems that accept DDR3 memory.
Fits 240-pin DDR3 slots on AMD and Intel platforms
The 240-pin form factor plugs directly into any desktop motherboard equipped for DDR3 1333 (PC3-10600). Because it is unbuffered and non-ECC, it works in standard consumer boards without requiring registered or error-correcting memory support. No extra cooling or power connectors are needed beyond the slot itself.
Replaces Crucial BL51264BA1339 and BLT4G3D1337DT1TX0
The module is validated as a direct equivalent for the listed Crucial part numbers, simplifying upgrade planning when the original sticks are unavailable. Every unit undergoes quality-assurance testing before shipment to confirm reliable operation at the rated speed and voltage.
Öne çıkanlar
- Boosts system responsiveness with a 4GB DDR3 1333MHz module
- Runs at standard 1.5V for broad desktop compatibility
- Unbuffered non-ECC design fits typical consumer motherboards
- Uses major-brand chips tested for dependable operation
- Direct replacement for Crucial BL51264BA1339 and BLT4G3D1337DT1TX0
Teknik özellikler
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| Tested Frequency | 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Bu ürünle ilgili sorular
Will the 1.5 V standard voltage limit overclocking headroom on this DDR3 1333 module?
The module runs at 1.50 V DDR3 standard voltage with CL9 timings, so raising frequency much beyond 1333 MHz would require voltage increases the chips are not rated for.
How much heat does a single 4 GB DDR3 DIMM produce when the system runs all day?
At 1.5 V and 1333 MHz the stick draws only a few watts, so passive airflow inside a normal desktop case keeps temperatures well within safe limits.
What motherboard slot must already be free for this 240-pin DIMM to install?
You need an open DDR3 240-pin DIMM slot on a desktop board that supports PC3-10600 unbuffered non-ECC memory.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
