Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333 PC3-10600 CL9 1.5V 240-Pin DIMM Desktop RAM

SKU CH-VYVP-SB2Z9

A 4GB DDR3 1333MHz PC3-10600 CL9 1.5V 240-pin DIMM desktop memory upgrade for AMD and Intel systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • Boosts system responsiveness with a 4GB DDR3 1333MHz module
  • Runs at standard 1.5V for broad desktop compatibility
  • Unbuffered non-ECC design fits typical consumer motherboards
  • Uses major-brand chips tested for dependable operation
  • Direct replacement for Crucial BL51264BA1339 and BLT4G3D1337DT1TX0

4GB DDR3 1333 Desktop DIMM

This single 4GB DDR3 module runs at 1333 MHz with a CAS latency of CL9 and operates at the standard 1.5V. It is built as an unbuffered, non-ECC DIMM using major-brand chips and is intended for desktop systems that accept DDR3 memory.

Fits 240-pin DDR3 slots on AMD and Intel platforms

The 240-pin form factor plugs directly into any desktop motherboard equipped for DDR3 1333 (PC3-10600). Because it is unbuffered and non-ECC, it works in standard consumer boards without requiring registered or error-correcting memory support. No extra cooling or power connectors are needed beyond the slot itself.

Replaces Crucial BL51264BA1339 and BLT4G3D1337DT1TX0

The module is validated as a direct equivalent for the listed Crucial part numbers, simplifying upgrade planning when the original sticks are unavailable. Every unit undergoes quality-assurance testing before shipment to confirm reliable operation at the rated speed and voltage.

Fordele

  • Boosts system responsiveness with a 4GB DDR3 1333MHz module
  • Runs at standard 1.5V for broad desktop compatibility
  • Unbuffered non-ECC design fits typical consumer motherboards
  • Uses major-brand chips tested for dependable operation
  • Direct replacement for Crucial BL51264BA1339 and BLT4G3D1337DT1TX0

Specifikationer

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Spørgsmål om denne vare

Will the 1.5 V standard voltage limit overclocking headroom on this DDR3 1333 module?

The module runs at 1.50 V DDR3 standard voltage with CL9 timings, so raising frequency much beyond 1333 MHz would require voltage increases the chips are not rated for.

How much heat does a single 4 GB DDR3 DIMM produce when the system runs all day?

At 1.5 V and 1333 MHz the stick draws only a few watts, so passive airflow inside a normal desktop case keeps temperatures well within safe limits.

What motherboard slot must already be free for this 240-pin DIMM to install?

You need an open DDR3 240-pin DIMM slot on a desktop board that supports PC3-10600 unbuffered non-ECC memory.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.